Application
Vacuum pumps for laminating, pressing and composites
In laminating and pressing under vacuum, the air between the membrane or film and the workpiece is extracted; the air pressure presses veneer, decorative film or the layers of a solar module on evenly, and air trapped in the adhesive or resin is removed. In composites, the same vacuum draws the resin through the fibre layers and compacts the laminate during curing. Below you can see how the application works, what vacuum the manufacturers name and which of their series are intended for it – 254 models from 4 manufacturers.
Compare 254 modelsHow it works
- 254Models
- 16Series
- 4Manufacturers
- approx. 200 mbar(a)Laminator for solar modules (Atlas Copco)
Touch the points: each part of the system explains itself.
In short
Laminating, pressing and composites: the key facts
- Contact pressureBecker and Elmo Rietschle name the even contact pressure for veneer and film as the task of the vacuum; for this, Becker names a deep, stable ultimate vacuum and the series U5, KVT and VT for furniture and door making.
- Which vacuumFor the solar module laminator, Atlas Copco names approx. 200 mbar(a); Becker gives 1 to ≤ 0.1 mbar for U5 and 100–150 mbar for KVT/VT.
- Solar modulesAccording to Leybold, the vacuum degasses the polymer when the module is bonded and prevents bubbles (SCREWLINE SP 630, DRYVAC, CLAWVAC, RUVAC WSU 2001); for bonding the layers into the module, Busch names COBRA, PANDA WV, MINK MM and R5; Atlas Copco names DWS VSD+ and DZS VSD+.
- CompositesLeybold: vacuum compacts laminates and removes trapped air – in vacuum bagging, in vacuum infusion and in resin injection (RTM). In rotor blade production, Busch describes how resin is drawn through the layers under the film (MINK, R5); Edwards names wet and dry pump carts that draw resin into the fibres.
Operating principle
How it works: Laminating, pressing and composites
The drawing shows the basic principle in section. The systems and pumps of the individual manufacturers differ in detail.
- Lay-upVeneer, film or the fibre layers are placed on the mould or plate and covered with a membrane, vacuum bag or cover film.
- EvacuationThe air under the membrane or bag is extracted; the air pressure presses evenly (Becker, Elmo Rietschle). Atlas Copco names approx. 200 mbar(a) in the laminator, Becker 100–150 mbar for KVT/VT and down to ≤ 0.1 mbar for U5.
- CuringGlue, resin or composite film cure under vacuum and heat; Leybold describes the compaction and de-aeration of the laminate during curing. The press is then vented and the part removed.
Vacuum and sizing
Laminating, pressing and composites: how much vacuum is needed
What the manufacturers say about pressure, pumping speed and sizing.
Which vacuum
For the solar module laminator, Atlas Copco names approx. 200 mbar(a). Becker names 1 to ≤ 0.1 mbar for U5 and 100–150 mbar for KVT/VT.
Which pumping speed
Becker names U5 with 40–120 m³/h and KVT/VT with 25–145 m³/h for laminating, coating and membrane pressing.
What determines the sizing
For even contact pressure, Becker names a deep, stable ultimate vacuum. According to Leybold, vacuum infusion involves evacuating, infusing resin and compacting under controlled pressure; in RTM, air and moisture are removed so that the mould is filled without bubbles.
What the manufacturers point out
For solar lamination, Leybold names SCREWLINE SP 630, DRYVAC, CLAWVAC and RUVAC WSU 2001, for composites SOGEVAC B, CLAWVAC B and VARODRY; NOVADRY and CLAWVAC are only listed for 3D laminating presses and for bonding/pressing. For the resin infusion of rotor blades, Edwards names wet and dry pump carts; Pfeiffer Vacuum lists laminating in its product finder without a description.
Technology
Laminating, pressing and composites: the vacuum pumps the manufacturers name
Listed are the series the manufacturer itself names for this application. “Show only …” sets the filter of the product overview.
Oil-lubricated rotary vane vacuum pumps
89 models · 3–1,800 m³/h
Screw vacuum pumps
78 models · 63–5,136 m³/h
Claw vacuum pumps
42 models · 18–1,150 m³/h
Roots vacuum pumps
34 models · 210–12,000 m³/h
Dry-running rotary vane vacuum pumps
11 models · 1.9–129 m³/h
Edwards names the application without naming a series for it. Elmo Rietschle names the application without naming a series for it. Pfeiffer Vacuum names the application without naming a series for it.
Product overview
Laminating, pressing and composites: all 254 models compared
Use the filters on the left to narrow the selection – by manufacturer, technology and the models’ key figures, for 50 or 60 Hz.
Atlas Copco DWS VSD+ series 6 models
DWS 160 VSD+Pumping speed 160 m³/h 50 Hz160 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 7.5 kW 50 Hz7.5 kW 60 HzVariants 1DWS 250 VSD+Pumping speed 250 m³/h 50 Hz250 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 7.5 kW 50 Hz7.5 kW 60 HzVariants 1DWS 450 VSD+Pumping speed 450 m³/h 50 Hz450 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 11 kW 50 Hz11 kW 60 HzVariants 3DWS 750 VSD+Pumping speed 740 m³/h 50 Hz740 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 22 kW 50 Hz22 kW 60 HzVariants 3DWS 160/1750 VSD+Pumping speed 1,200 m³/h 50 Hz1,200 m³/h 60 HzUltimate pressure 1 × 10-3 mbarRated motor power 12 kW 50 Hz12 kW 60 HzVariants 1DWS 250/2600 VSD+Pumping speed 1,900 m³/h 50 Hz1,900 m³/h 60 HzUltimate pressure 1 × 10-3 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 1Atlas Copco DZS VSD+ series 5 models
DZS 100 VSD+Pumping speed 105 m³/h 50 Hz105 m³/h 60 HzUltimate pressure 50 mbarRated motor power 3 kW 50 Hz3 kW 60 HzVariants 3DZS 200 VSD+Pumping speed 189 m³/h 50 Hz189 m³/h 60 HzUltimate pressure 50 mbarRated motor power 5.5 kW 50 Hz5.5 kW 60 HzVariants 3DZS 400 VSD+Pumping speed 398 m³/h 50 Hz398 m³/h 60 HzUltimate pressure 140 mbarRated motor power 11 kW 50 Hz11 kW 60 HzVariants 3DZS 600 VSD+Pumping speed 600 m³/h 50 Hz600 m³/h 60 HzUltimate pressure 200 mbarRated motor power 11 kW 50 Hz11 kW 60 HzVariants 2DZS 1200 VSD+Pumping speed 1,140 m³/h 50 Hz1,140 m³/h 60 HzUltimate pressure 200 mbarRated motor power 22 kW 50 Hz22 kW 60 HzVariants 2Atlas Copco GHS VSD+ series 21 models
GHS 350 VSD+Pumping speed 400 m³/h 50 Hz400 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 5.5 kW 50 Hz5.5 kW 60 HzVariants 29GHS 402 VSD+Pumping speed 467 m³/h 50 Hz467 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 5.5 – 7.5 kW 50 Hz5.5 – 7.5 kW 60 HzVariants 4GHS 585 VSD+Pumping speed 560 m³/h 50 Hz560 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 7.5 kW 50 Hz7.5 kW 60 HzVariants 30GHS 602 VSD+Pumping speed 640 m³/h 50 Hz640 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 7.5 – 11 kW 50 Hz7.5 – 11 kW 60 HzVariants 4GHS 730 VSD+Pumping speed 730 m³/h 50 Hz730 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 11 kW 50 Hz11 kW 60 HzVariants 30GHS 752 VSD+Pumping speed 805 m³/h 50 Hz805 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 11 – 15 kW 50 Hz11 – 15 kW 60 HzVariants 4GHS 900 VSD+Pumping speed 870 m³/h 50 Hz870 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 32GHS 902 VSD+Pumping speed 917 m³/h 50 Hz917 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 15 – 18.5 kW 50 Hz15 – 18.5 kW 60 HzVariants 4GHS 1002 VSD+Pumping speed 1,039 m³/h 50 Hz1,039 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants GHS 1202 VSD+Pumping speed 1,172 m³/h 50 Hz1,172 m³/h 60 HzUltimate pressure 0.3 mbarRated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants 9GHS 1300 VSD+Pumping speed 1,250 – 1,615 m³/h 50 Hz1,250 – 1,615 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 18 – 22 kW 50 Hz18 – 22 kW 60 HzVariants 33GHS 1402 VSD+Pumping speed 1,383 m³/h 50 Hz1,383 m³/h 60 HzUltimate pressure 0.3 mbarRated motor power 22 kW 50 Hz22 kW 60 HzVariants 9GHS 1602 VSD+Pumping speed 1,581 m³/h 50 Hz1,581 m³/h 60 HzUltimate pressure 0.3 mbarRated motor power 30 kW 50 Hz30 kW 60 HzVariants 9GHS 1600 VSD+Pumping speed 1,590 – 1,811 m³/h 50 Hz1,590 – 1,811 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 28 – 30 kW 50 Hz28 – 30 kW 60 HzVariants 33GHS 2002 VSD+Pumping speed 1,771 m³/h 50 Hz1,771 m³/h 60 HzUltimate pressure 0.3 mbarRated motor power 37 kW 50 Hz37 kW 60 HzVariants 9GHS 1900 VSD+Pumping speed 1,810 m³/h 50 Hz1,810 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 37 kW 50 Hz37 kW 60 HzVariants 21GHS 2700 VSD+Pumping speed 2,674 m³/h 50 Hz2,674 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 45 kW 50 Hz45 kW 60 HzVariants 8GHS 3400 VSD+Pumping speed 3,268 m³/h 50 Hz3,268 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 55 kW 50 Hz55 kW 60 HzVariants 8GHS 3800 VSD+Pumping speed 3,724 m³/h 50 Hz3,724 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 55 kW 50 Hz55 kW 60 HzVariants 9GHS 4600 VSD+Pumping speed 4,494 m³/h 50 Hz4,494 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 75 kW 50 Hz75 kW 60 HzVariants 9GHS 5400 VSD+Pumping speed 5,136 m³/h 50 Hz5,136 m³/h 60 HzUltimate pressure 0.35 mbarRated motor power 90 kW 50 Hz90 kW 60 HzVariants 9Becker KVT series 4 models
KVT 3.60Pumping speed 55 m³/h 50 Hz66 m³/h 60 HzUltimate pressure 100 mbarRated motor power 2.2 kW 50 Hz2.6 kW 60 HzVariants 6
KVT 3.80Pumping speed 67 m³/h 50 Hz78.5 m³/h 60 HzUltimate pressure 100 mbarRated motor power 2.2 kW 50 Hz2.6 kW 60 HzVariants 6
KVT 3.100Pumping speed 98 m³/h 50 Hz112 m³/h 60 HzUltimate pressure 100 mbarRated motor power 3 kW 50 Hz3.6 kW 60 HzVariants 8
KVT 3.140Pumping speed 129 m³/h 50 Hz154 m³/h 60 HzUltimate pressure 100 mbarRated motor power 4 kW 50 Hz4.5 – 4.8 kW 60 HzVariants 7Becker U series 8 models
U 5.40 (XL K)Pumping speed 40 m³/h 50 Hz48 m³/h 60 HzUltimate pressure 1 mbarRated motor power 1.1 kW 50 Hz1.35 kW 60 HzVariants 5U 5.45Pumping speed 45 m³/h 50 Hz54 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 1.5 – 1.8 kW 50 Hz1.5 – 1.8 kW 60 HzVariants 4U 5.65 (XL K)Pumping speed 65 m³/h 50 Hz78 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 1.5 – 1.8 kW 50 Hz1.5 – 1.8 kW 60 HzVariants 4
U 5.71Pumping speed 70 m³/h 50 Hz84 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 1.5 kW 50 Hz1.8 kW 60 HzVariants 5
U 5.101Pumping speed 100 m³/h 50 Hz120 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 2.2 kW 50 Hz2.2 – 2.6 kW 60 HzVariants 4
U 5.166Pumping speed 165 m³/h 50 Hz198 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 3 – 4 kW 50 Hz3.6 – 4.8 kW 60 HzVariants 8
U 5.201Pumping speed 200 m³/h 50 Hz240 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 4 – 5.5 kW 50 Hz4.5 – 6.6 kW 60 HzVariants 10U 5.301Pumping speed 300 m³/h 50 Hz360 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 5.5 – 7.5 kW 50 Hz6.6 – 9 kW 60 HzVariants 9Becker VT series 7 models
VT 4.2Pumping speed 1.9 m³/h 50 Hz2.3 m³/h 60 HzUltimate pressure 400 mbarRated motor power 0.09 kW 50 Hz0.105 kW 60 HzVariants 1
VT 4.4Pumping speed 4.1 m³/h 50 Hz4.7 m³/h 60 HzUltimate pressure 150 mbarRated motor power 0.18 kW 50 Hz0.21 – 0.22 kW 60 HzVariants 2
VT 4.8Pumping speed 8 m³/h 50 Hz9.1 m³/h 60 HzUltimate pressure 150 mbarRated motor power 0.3 – 0.37 kW 50 Hz0.35 – 0.44 kW 60 HzVariants 3
VT 4.10Pumping speed 10 m³/h 50 Hz12 m³/h 60 HzUltimate pressure 150 mbarRated motor power 0.37 kW 50 Hz0.44 – 0.45 kW 60 HzVariants 3
VT 4.16Pumping speed 16 m³/h 50 Hz19 m³/h 60 HzUltimate pressure 150 mbarRated motor power 0.55 kW 50 Hz0.66 – 0.7 kW 60 HzVariants 4
VT 4.25Pumping speed 25 m³/h 50 Hz30 m³/h 60 HzUltimate pressure 150 mbarRated motor power 0.75 – 0.8 kW 50 Hz0.9 – 1 kW 60 HzVariants 5
VT 4.40Pumping speed 40 m³/h 50 Hz48 m³/h 60 HzUltimate pressure 150 mbarRated motor power 1.1 – 1.3 kW 50 Hz1.1 – 1.5 kW 60 HzVariants 5Busch COBRA Industry series 36 models
COBRA NS 0070 CPumping speed 70 m³/h 50 Hz85 m³/h 60 HzUltimate pressure 0.03 mbarRated motor power 4 kW 50 Hz4.4 kW 60 HzVariants 
COBRA NC 0100 BPumping speed 110 m³/h 50 Hz130 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 3.5 kW 50 Hz4.8 kW 60 HzVariants 4
COBRA NC 0100 B ECOTORQUEPumping speed 130 m³/h 50 Hz130 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 4.8 kW 50 Hz4.8 kW 60 HzVariants 
COBRA NS 0160 CPumping speed 135 m³/h 50 Hz170 m³/h 60 HzUltimate pressure 0.03 mbarRated motor power 5.5 kW 50 Hz6.6 kW 60 HzVariants 
COBRA NC 0200 BPumping speed 220 m³/h 50 Hz265 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 6 kW 50 Hz7.6 kW 60 HzVariants 4
COBRA NC 0200 B ECOTORQUEPumping speed 265 m³/h 50 Hz265 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 7.6 kW 50 Hz7.6 kW 60 HzVariants 
COBRA NC 0300 BPumping speed 320 m³/h 50 Hz385 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 7.5 kW 50 Hz9.5 kW 60 HzVariants 4
COBRA NC 0400 BPumping speed 350 m³/h 50 Hz420 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 7.5 kW 50 Hz9.5 kW 60 HzVariants 
COBRA NX 0450 APumping speed 350 m³/h 50 Hz420 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 7.5 kW 50 Hz9.5 kW 60 HzVariants 
COBRA NC 0300 B ECOTORQUEPumping speed 385 m³/h 50 Hz385 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 9.5 kW 50 Hz9.5 kW 60 HzVariants 
COBRA NC 0400 B ECOTORQUEPumping speed 420 m³/h 50 Hz420 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 9.5 kW 50 Hz9.5 kW 60 HzVariants 
COBRA NX 0450 A ECOTORQUEPumping speed 420 m³/h 50 Hz420 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 11 kW 50 Hz11 kW 60 HzVariants 
COBRA NC 0500 BPumping speed 490 m³/h 50 Hz490 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 9 kW 50 Hz9 kW 60 HzVariants 
COBRA NC 0630 C VRPumping speed 580 m³/h 50 Hz680 m³/h 60 HzUltimate pressure 25 mbarRated motor power 22 kW 50 Hz22 kW 60 HzVariants COBRA NC 0600 CPumping speed 600 m³/h 50 Hz600 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants 
COBRA NS 0600 CPumping speed 600 m³/h 50 Hz600 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 
COBRA NC 0630 CPumping speed 630 m³/h 50 Hz630 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 15 kW 50 Hz17 kW 60 HzVariants 
COBRA NC 0630 C ECOTORQUEPumping speed 630 m³/h 50 Hz630 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 17 kW 50 Hz17 kW 60 HzVariants 
COBRA DX 0650 A PLUSPumping speed 650 m³/h 50 Hz650 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 
COBRA NX 0650 APumping speed 650 m³/h 50 Hz650 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 12.5 kW 50 Hz15 kW 60 HzVariants 
COBRA NX 0650 A ECOTORQUEPumping speed 650 m³/h 50 Hz650 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 
COBRA NF 0750 APumping speed 750 m³/h 50 Hz750 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 
COBRA NC 1000 BPumping speed 840 m³/h 50 Hz1,000 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 22 kW 50 Hz25 kW 60 HzVariants 
COBRA DX 0950 A PLUSPumping speed 950 m³/h 50 Hz950 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants 
COBRA NF 0950 APumping speed 950 m³/h 50 Hz950 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants 
COBRA NX 0950 A ECOTORQUEPumping speed 950 m³/h 50 Hz950 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants 
COBRA NC 1500 B VRPumping speed 1,160 m³/h 50 Hz1,400 m³/h 60 HzUltimate pressure 20 mbarRated motor power 30 kW 50 Hz36 kW 60 HzVariants 
COBRA DX 2000 A PLUSPumping speed 1,900 m³/h 50 Hz1,900 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 37 kW 50 Hz37 kW 60 HzVariants 
COBRA NC 2500 CPumping speed 2,000 m³/h 50 Hz2,500 m³/h 60 HzUltimate pressure 1 mbarRated motor power 55 kW 50 Hz63 kW 60 HzVariants 
COBRA NC 2000 C VRPumping speed 2,100 m³/h 50 Hz2,600 m³/h 60 HzUltimate pressure 20 mbarRated motor power 55 kW 50 Hz63 kW 60 HzVariants 
COBRA DH 2760 APumping speed 2,112 m³/h 50 Hz2,112 m³/h 60 HzUltimate pressure 1 × 10-3 mbarRated motor power 22.5 kW 50 Hz22.5 kW 60 HzVariants 
COBRA DH 2780 APumping speed 2,250 m³/h 50 Hz2,250 m³/h 60 HzUltimate pressure 1 × 10-3 mbarRated motor power 26 kW 50 Hz26 kW 60 HzVariants 
COBRA DH 4560 APumping speed 3,077 m³/h 50 Hz3,077 m³/h 60 HzUltimate pressure 1 × 10-3 mbarRated motor power 22.5 kW 50 Hz22.5 kW 60 HzVariants 
COBRA DH 4580 APumping speed 3,512 m³/h 50 Hz3,512 m³/h 60 HzUltimate pressure 1 × 10-3 mbarRated motor power 26 kW 50 Hz26 kW 60 HzVariants 
COBRA DH 6260 APumping speed 3,781 m³/h 50 Hz3,781 m³/h 60 HzUltimate pressure 1 × 10-3 mbarRated motor power 22.5 kW 50 Hz22.5 kW 60 HzVariants 
COBRA DH 6280 APumping speed 4,652 m³/h 50 Hz4,652 m³/h 60 HzUltimate pressure 1 × 10-3 mbarRated motor power 26 kW 50 Hz26 kW 60 HzVariants Busch MINK series 32 models
MINK MB 0018 APumping speed 18 m³/h 50 Hz18 m³/h 60 HzUltimate pressure 600 mbarRated motor power 0.5 kW 50 Hz0.5 kW 60 HzVariants 2
MINK MV 0040 E ECOTORQUEPumping speed 40 m³/h 50 Hz40 m³/h 60 HzUltimate pressure 40 mbarRated motor power Variants 
MINK MI 2124 BVPumping speed 50 m³/h 50 Hz60 m³/h 60 HzUltimate pressure 20 mbarRated motor power 2 kW 50 Hz2.4 kW 60 HzVariants 
MINK MV 0060 E ECOTORQUEPumping speed 60 m³/h 50 Hz60 m³/h 60 HzUltimate pressure 40 mbarRated motor power Variants 
MINK MM 0084 APumping speed 62 m³/h 50 Hz75 m³/h 60 HzUltimate pressure 60 mbarRated motor power 1.5 kW 50 Hz1.7 kW 60 HzVariants MINK MM 1104 BVPumping speed 62 m³/h 50 Hz75 m³/h 60 HzUltimate pressure 60 mbarRated motor power 1.5 kW 50 Hz1.7 kW 60 HzVariants 10
MINK MM 1104 CVMPumping speed 62 m³/h 50 HzUltimate pressure 400 mbarRated motor power 1.3 kW 50 HzVariants 
MINK MM 0104 APumping speed 80 m³/h 50 Hz95 m³/h 60 HzUltimate pressure 60 mbarRated motor power 2.2 kW 50 Hz2.4 kW 60 HzVariants 
MINK MM 1144 BVPumping speed 80 m³/h 50 Hz95 m³/h 60 HzUltimate pressure 60 mbarRated motor power 2.2 kW 50 Hz2.4 kW 60 HzVariants 9
MINK MV 0080 E ECOTORQUEPumping speed 80 m³/h 50 Hz80 m³/h 60 HzUltimate pressure 40 mbarRated motor power Variants 
MINK MM 0142 APumping speed 110 m³/h 50 Hz135 m³/h 60 HzUltimate pressure 40 mbarRated motor power 3 kW 50 Hz3.4 kW 60 HzVariants 
MINK MM 1102 BVPumping speed 110 m³/h 50 Hz135 m³/h 60 HzUltimate pressure 60 mbarRated motor power 3 kW 50 Hz3.4 kW 60 HzVariants 6
MINK MM 1102 CVMPumping speed 110 m³/h 50 HzUltimate pressure 400 mbarRated motor power 2.2 kW 50 HzVariants 
MINK MI 2122 BVPumping speed 120 m³/h 50 Hz145 m³/h 60 HzUltimate pressure 20 mbarRated motor power 5.1 kW 50 Hz6.8 kW 60 HzVariants 
MINK MM 0182 APumping speed 140 m³/h 50 Hz175 m³/h 60 HzUltimate pressure 40 mbarRated motor power 3.5 kW 50 Hz4.8 kW 60 HzVariants 
MINK MM 1142 BVPumping speed 140 m³/h 50 Hz175 m³/h 60 HzUltimate pressure 60 mbarRated motor power 3.5 kW 50 Hz4.8 kW 60 HzVariants 13
MINK MM 1324 AVPumping speed 160 m³/h 50 Hz190 m³/h 60 HzUltimate pressure 60 mbarRated motor power 4 kW 50 Hz4.2 kW 60 HzVariants 2
MINK MM 1202 AVPumping speed 200 m³/h 50 Hz240 m³/h 60 HzUltimate pressure 100 mbarRated motor power 4.3 kW 50 Hz5.2 kW 60 HzVariants 11
MINK MM 1252 AVPumping speed 245 m³/h 50 Hz290 m³/h 60 HzUltimate pressure 100 mbarRated motor power 5.5 kW 50 Hz6.5 kW 60 HzVariants 8MINK MW 0332 BPumping speed 280 m³/h 50 Hz330 m³/h 60 HzUltimate pressure 0.8 mbarRated motor power 7.5 kW 50 Hz9.5 kW 60 HzVariants 
MINK MV 0312 BPumping speed 290 m³/h 50 Hz345 m³/h 60 HzUltimate pressure 150 mbarRated motor power 5.5 kW 50 Hz6.5 kW 60 HzVariants 4
MINK MM 1322 AVPumping speed 300 m³/h 50 Hz360 m³/h 60 HzUltimate pressure 150 mbarRated motor power 6 kW 50 Hz8 kW 60 HzVariants 10
MINK MV 0310 BPumping speed 345 m³/h 50 Hz345 m³/h 60 HzUltimate pressure 150 mbarRated motor power 6 kW 50 Hz6 kW 60 HzVariants MINK MV 0360 A ECOTORQUEPumping speed 360 m³/h 50 Hz360 m³/h 60 HzUltimate pressure 100 mbarRated motor power 7.5 kW 50 Hz7.5 kW 60 HzVariants 
MINK MM 1402 AVPumping speed 400 m³/h 50 Hz470 m³/h 60 HzUltimate pressure 200 mbarRated motor power 7.5 kW 50 Hz9.5 kW 60 HzVariants 3
MINK MV 0502 BPumping speed 400 m³/h 50 Hz470 m³/h 60 HzUltimate pressure 200 mbarRated motor power 7.5 kW 50 Hz9.5 kW 60 HzVariants 2
MINK MV 0500 BPumping speed 470 m³/h 50 Hz470 m³/h 60 HzUltimate pressure 200 mbarRated motor power 11 kW 50 Hz11 kW 60 HzVariants 
MINK MM 1502 AVPumping speed 500 m³/h 50 Hz600 m³/h 60 HzUltimate pressure 200 mbarRated motor power 11 kW 50 Hz12.6 kW 60 HzVariants 5
MINK MV 0602 BPumping speed 500 m³/h 50 Hz600 m³/h 60 HzUltimate pressure 200 mbarRated motor power 11 kW 50 Hz12.6 kW 60 HzVariants 3
MINK MV 0600 BPumping speed 600 m³/h 50 Hz600 m³/h 60 HzUltimate pressure 200 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 
MINK MV 1202 BPumping speed 950 m³/h 50 Hz1,150 m³/h 60 HzUltimate pressure 200 mbarRated motor power 18.5 kW 50 Hz22 kW 60 HzVariants 3MINK MV 1200 B ECOTORQUEPumping speed 1,150 m³/h 50 Hz1,150 m³/h 60 HzUltimate pressure 200 mbarRated motor power 25 kW 50 Hz25 kW 60 HzVariants Busch PANDA/PUMA series 26 models
PANDA WV 0250 CPumping speed 250 m³/h 50 Hz300 m³/h 60 HzUltimate pressure Rated motor power 1 kW 50 Hz1.2 kW 60 HzVariants PANDA WZ 0250 BPumping speed 263 m³/h 50 Hz315 m³/h 60 HzUltimate pressure Rated motor power 1.5 kW 50 Hz1.8 kW 60 HzVariants PANDA WV 0500 CPumping speed 500 m³/h 50 Hz600 m³/h 60 HzUltimate pressure Rated motor power 2.2 kW 50 Hz3 kW 60 HzVariants 4PUMA WY 0500 CPumping speed 500 m³/h 50 Hz600 m³/h 60 HzUltimate pressure Rated motor power 4 kW 50 Hz4.4 kW 60 HzVariants PUMA WP 0500 D2Pumping speed 520 m³/h 50 Hz620 m³/h 60 HzUltimate pressure Rated motor power 2.2 kW 50 Hz3 kW 60 HzVariants PANDA WZ 0500 BPumping speed 525 m³/h 50 Hz630 m³/h 60 HzUltimate pressure Rated motor power 4 kW 50 Hz4.4 kW 60 HzVariants PUMA WP 0700 DPumping speed 700 m³/h 50 Hz840 m³/h 60 HzUltimate pressure Rated motor power 3.5 kW 50 Hz4.8 kW 60 HzVariants PUMA WY 0700 CPumping speed 700 m³/h 50 Hz840 m³/h 60 HzUltimate pressure Rated motor power 4 kW 50 Hz4.4 kW 60 HzVariants PUMA WP 1000 D2Pumping speed 1,000 m³/h 50 Hz1,200 m³/h 60 HzUltimate pressure Rated motor power 3.5 kW 50 Hz4.8 kW 60 HzVariants PANDA WV 1200 APumping speed 1,050 m³/h 50 Hz1,260 m³/h 60 HzUltimate pressure Rated motor power 3.5 kW 50 Hz4.8 kW 60 HzVariants 5PANDA WZ 1200 APumping speed 1,050 m³/h 50 Hz1,260 m³/h 60 HzUltimate pressure Rated motor power 4 kW 50 Hz4.4 kW 60 HzVariants PUMA WY 1250 CPumping speed 1,250 m³/h 50 Hz1,500 m³/h 60 HzUltimate pressure Rated motor power 4 kW 50 Hz4.4 kW 60 HzVariants PUMA WP 1250 D2Pumping speed 1,295 m³/h 50 Hz1,555 m³/h 60 HzUltimate pressure Rated motor power 4.3 kW 50 Hz5.2 kW 60 HzVariants PANDA WV 1800 APumping speed 1,600 m³/h 50 Hz1,920 m³/h 60 HzUltimate pressure Rated motor power 4.3 kW 50 Hz5.2 kW 60 HzVariants 5PUMA WY 2000 CPumping speed 2,010 m³/h 50 Hz2,435 m³/h 60 HzUltimate pressure Rated motor power 5.5 kW 50 Hz6.6 kW 60 HzVariants PUMA WP 2000 D2Pumping speed 2,020 m³/h 50 Hz2,435 m³/h 60 HzUltimate pressure Rated motor power 5.5 kW 50 Hz7 kW 60 HzVariants PANDA WV 2400 APumping speed 2,120 m³/h 50 Hz2,540 m³/h 60 HzUltimate pressure Rated motor power 5.5 kW 50 Hz7 kW 60 HzVariants 5PANDA WZ 2400 APumping speed 2,120 m³/h 50 Hz2,540 m³/h 60 HzUltimate pressure Rated motor power 5.5 kW 50 Hz6.6 kW 60 HzVariants PANDA WV 2200 APumping speed 2,155 m³/h 50 Hz2,585 m³/h 60 HzUltimate pressure Rated motor power 5.5 kW 50 Hz6.3 kW 60 HzVariants PUMA WY 3600 APumping speed 3,600 m³/h 50 Hz3,600 m³/h 60 HzUltimate pressure Rated motor power 15 kW 50 Hz15 kW 60 HzVariants PANDA WV 4500 BPumping speed 4,500 m³/h 50 Hz5,400 m³/h 60 HzUltimate pressure Rated motor power 11 kW 50 Hz12.6 kW 60 HzVariants 4PUMA WP 4500 B2Pumping speed 4,500 m³/h 50 Hz5,400 m³/h 60 HzUltimate pressure Rated motor power 11 kW 50 Hz12.6 kW 60 HzVariants PUMA WP 5400 APumping speed 6,480 m³/h 50 Hz6,480 m³/h 60 HzUltimate pressure Rated motor power 11 kW 50 Hz11 kW 60 HzVariants PUMA WP 8100 APumping speed 8,100 m³/h 50 Hz8,100 m³/h 60 HzUltimate pressure Rated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants PUMA WY 8000 APumping speed 8,100 m³/h 50 Hz8,100 m³/h 60 HzUltimate pressure Rated motor power 11 kW 50 Hz11 kW 60 HzVariants PUMA WG 9600Pumping speed 12,000 m³/h 50 Hz12,000 m³/h 60 HzUltimate pressure 130 mbarRated motor power Variants Busch R5 series 58 models
R5 PB 0003 DPumping speed 3 m³/h 50 Hz3.8 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.1 kW 50 Hz0.12 kW 60 HzVariants R5 PB 0004 CPumping speed 4 m³/h 50 Hz4.8 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.1 kW 50 Hz0.12 kW 60 HzVariants R5 PB 0008 CPumping speed 8 m³/h 50 Hz9.6 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.35 kW 50 Hz0.45 kW 60 HzVariants 
R5 KB 0010 EPumping speed 10 m³/h 50 Hz12 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.37 kW 50 Hz0.37 kW 60 HzVariants 1R5 KD 0012 APumping speed 10 m³/h 50 Hz12 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.37 kW 50 Hz0.37 kW 60 HzVariants R5 RA 0010 CPumping speed 10 m³/h 50 Hz12 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 0.45 kW 50 Hz0.45 kW 60 HzVariants 1R5 RC 0010 CPumping speed 10 m³/h 50 Hz12 m³/h 60 HzUltimate pressure 20 mbarRated motor power 0.45 kW 50 Hz0.45 kW 60 HzVariants 1R5 KB 0016 EPumping speed 16 m³/h 50 Hz19 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.55 kW 50 Hz0.55 kW 60 HzVariants 1R5 KD 0020 APumping speed 16 m³/h 50 Hz20 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.55 kW 50 Hz0.55 kW 60 HzVariants R5 RA 0016 CPumping speed 16 m³/h 50 Hz19 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 0.55 kW 50 Hz0.7 kW 60 HzVariants 1R5 RC 0016 CPumping speed 16 m³/h 50 Hz19 m³/h 60 HzUltimate pressure 20 mbarRated motor power 0.55 kW 50 Hz0.7 kW 60 HzVariants 1R5 KB 0020 DPumping speed 20 m³/h 50 Hz24 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.75 kW 50 Hz0.75 kW 60 HzVariants 1
R5 RB 0021 CPumping speed 20 m³/h 50 Hz24 m³/h 60 HzUltimate pressure 1 mbarRated motor power 0.75 kW 50 Hz0.9 kW 60 HzVariants 2R5 RC 0021 CPumping speed 20 m³/h 50 Hz24 m³/h 60 HzUltimate pressure 20 mbarRated motor power 0.75 kW 50 Hz0.9 kW 60 HzVariants R5 KD 0025 APumping speed 22 m³/h 50 Hz25 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.75 kW 50 Hz0.9 kW 60 HzVariants R5 KB 0025 FPumping speed 25 m³/h 50 Hz30 m³/h 60 HzUltimate pressure 2 mbarRated motor power 0.9 kW 50 Hz1.1 kW 60 HzVariants 1
R5 RA 0025 FPumping speed 25 m³/h 50 Hz30 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 1 kW 50 Hz1.2 kW 60 HzVariants 3R5 KB 0040 DPumping speed 40 m³/h 50 Hz48 m³/h 60 HzUltimate pressure 2 mbarRated motor power 1.5 kW 50 Hz1.5 kW 60 HzVariants 1R5 RA 0040 FPumping speed 40 m³/h 50 Hz48 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 1.4 kW 50 Hz1.7 kW 60 HzVariants 3R5 RE 0040 CPumping speed 40 m³/h 50 Hz48 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 1.5 kW 50 Hz2.2 kW 60 HzVariants R5 RA 0063 FPumping speed 63 m³/h 50 Hz76 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 2 kW 50 Hz2.4 kW 60 HzVariants 3R5 RE 0063 CPumping speed 63 m³/h 50 Hz76 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 2.2 kW 50 Hz3 kW 60 HzVariants R5 RA 0100 FPumping speed 100 m³/h 50 Hz120 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 2.7 kW 50 Hz3.4 kW 60 HzVariants 3R5 RA 0155 APumping speed 150 m³/h 50 Hz175 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 4 kW 50 Hz4.2 kW 60 HzVariants R5 RA 0165 DPumping speed 160 m³/h 50 Hz190 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 5.5 kW 50 Hz6.6 kW 60 HzVariants 3R5 RA 0200 APumping speed 160 m³/h 50 Hz190 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 4 kW 50 Hz4.8 kW 60 HzVariants 
R5 RD 0200 APumping speed 160 m³/h 50 Hz190 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 4 kW 50 Hz4.2 kW 60 HzVariants 2R5 RA 0165 D ECOTORQUEPumping speed 190 m³/h 50 Hz190 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0200 A ECOTORQUEPumping speed 190 m³/h 50 Hz190 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0205 DPumping speed 200 m³/h 50 Hz240 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 5.5 kW 50 Hz6.6 kW 60 HzVariants 3R5 RA 0240 APumping speed 200 m³/h 50 Hz240 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 5.5 kW 50 Hz6.6 kW 60 HzVariants R5 RD 0240 APumping speed 200 m³/h 50 Hz240 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 4 kW 50 Hz4.2 kW 60 HzVariants 1R5 RA 0205 D ECOTORQUEPumping speed 240 m³/h 50 Hz240 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0240 A ECOTORQUEPumping speed 240 m³/h 50 Hz240 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0255 DPumping speed 250 m³/h 50 Hz300 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 7.5 kW 50 Hz9.2 kW 60 HzVariants 3R5 RD 0300 APumping speed 250 m³/h 50 Hz300 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 5.5 kW 50 Hz6.6 kW 60 HzVariants 1R5 RA 0255 D ECOTORQUEPumping speed 300 m³/h 50 Hz300 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0305 DPumping speed 300 m³/h 50 Hz360 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 8.3 kW 50 Hz10 kW 60 HzVariants 3R5 RA 0360 APumping speed 300 m³/h 50 Hz360 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 7.5 kW 50 Hz9.2 kW 60 HzVariants R5 RD 0360 APumping speed 300 m³/h 50 Hz360 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 5.5 kW 50 Hz6.6 kW 60 HzVariants 2R5 RA 0305 D ECOTORQUEPumping speed 360 m³/h 50 Hz360 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0360 A ECOTORQUEPumping speed 360 m³/h 50 Hz360 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0400 CPumping speed 410 m³/h 50 Hz480 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 11 kW 50 Hz15 kW 60 HzVariants 3R5 RA 0520 APumping speed 430 m³/h 50 Hz520 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 11 kW 50 Hz12.5 kW 60 HzVariants 1R5 RA 0400 C ECOTORQUEPumping speed 480 m³/h 50 Hz480 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0502 CPumping speed 510 m³/h 50 Hz590 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 11 kW 50 Hz15 kW 60 HzVariants 1R5 RA 0520 A ECOTORQUEPumping speed 520 m³/h 50 Hz520 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0502 C ECOTORQUEPumping speed 580 m³/h 50 Hz580 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0600 A ECOTORQUEPumping speed 600 m³/h 50 Hz600 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants R5 RA 0630 CPumping speed 630 m³/h 50 Hz760 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 15 kW 50 Hz18.5 kW 60 HzVariants 2R5 RA 0630 C ECOTORQUEPumping speed 745 m³/h 50 Hz745 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power Variants R5 RA 0840 A ECOTORQUEPumping speed 840 m³/h 50 Hz840 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants R5 RA 0840 B PLUSPumping speed 840 m³/h 50 Hz840 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 18.5 kW 50 Hz18.5 kW 60 HzVariants R5 RA 1000 BPumping speed 1,000 m³/h 50 Hz1,200 m³/h 60 HzUltimate pressure 0.3 mbarRated motor power 22 kW 50 Hz30 kW 60 HzVariants 1R5 RA 1000 A PLUSPumping speed 1,200 m³/h 50 Hz1,200 m³/h 60 HzUltimate pressure 0.3 mbarRated motor power 30 kW 50 Hz30 kW 60 HzVariants R5 RA 1000 B ECOTORQUEPumping speed 1,200 m³/h 50 Hz1,200 m³/h 60 HzUltimate pressure 0.3 mbarRated motor power Variants R5 RA 1600 BPumping speed 1,600 m³/h 50 Hz1,800 m³/h 60 HzUltimate pressure 0.3 mbarRated motor power 30 kW 50 Hz37 kW 60 HzVariants 1R5 RA 1600 A PLUSPumping speed 1,800 m³/h 50 Hz1,800 m³/h 60 HzUltimate pressure 0.3 mbarRated motor power 37 kW 50 Hz37 kW 60 HzVariants Leybold CLAWVAC series 5 models
CLAWVAC CP 65 BPumping speed 65 m³/h 50 Hz79 m³/h 60 HzUltimate pressure 50 mbarRated motor power 1.8 – 2.2 kW 50 Hz2.2 kW 60 HzVariants 8
CLAWVAC CP 150 BPumping speed 152 m³/h 50 Hz184 m³/h 60 HzUltimate pressure 50 mbarRated motor power 3.7 – 4 kW 50 Hz3.7 kW 60 HzVariants 8
CLAWVAC CP 300 BPumping speed 295 m³/h 50 Hz347 m³/h 60 HzUltimate pressure 140 – 200 mbarRated motor power 6.2 – 7.5 kW 50 Hz7.5 kW 60 HzVariants 8CLAWVAC CP 500Pumping speed 500 m³/h 50 Hz600 m³/h 60 HzUltimate pressure 150 – 200 mbarRated motor power 9.2 kW 50 Hz11 kW 60 HzVariants 5CLAWVAC CP 1000Pumping speed 950 m³/h 50 Hz1,140 m³/h 60 HzUltimate pressure 150 – 200 mbarRated motor power 18.5 kW 50 Hz22 kW 60 HzVariants 5Leybold DRYVAC series 9 models
DRYVAC DV 200Pumping speed 210 m³/h 50 Hz210 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 7.5 kW 50 Hz7.5 kW 60 HzVariants 4
DRYVAC DV 300Pumping speed 280 m³/h 50 Hz280 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 7.5 kW 50 Hz7.5 kW 60 HzVariants 4
DRYVAC DV 500Pumping speed 380 – 460 m³/h 50 Hz380 – 460 m³/h 60 HzUltimate pressure 0.01 – 0.05 mbarRated motor power 11 kW 50 Hz11 kW 60 HzVariants 5
DRYVAC DV 650Pumping speed 650 m³/h 50 Hz650 m³/h 60 HzUltimate pressure 5 × 10-3 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 33DRYVAC DV 650 FPPumping speed 650 m³/h 50 Hz650 m³/h 60 HzUltimate pressure 5 × 10-3 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 8
DRYVAC DV 800Pumping speed 800 m³/h 50 Hz800 m³/h 60 HzUltimate pressure 5 × 10-3 mbarRated motor power 19.6 kW 50 Hz19.6 kW 60 HzVariants 11DRYVAC DV 800 FP-rPumping speed 800 m³/h 50 Hz800 m³/h 60 HzUltimate pressure 5 × 10-3 mbarRated motor power 19.6 kW 50 Hz19.6 kW 60 HzVariants 4
DRYVAC DV 1200Pumping speed 1,250 m³/h 50 Hz1,250 m³/h 60 HzUltimate pressure 5 × 10-3 mbarRated motor power 30 kW 50 Hz30 kW 60 HzVariants 3DRYVAC DV 1600Pumping speed 1,600 m³/h 50 Hz1,600 m³/h 60 HzUltimate pressure 5 × 10-3 mbarRated motor power 39.2 kW 50 Hz39.2 kW 60 HzVariants 1Leybold NOVADRY series 4 models
NOVADRY ND 65Pumping speed 63 m³/h 50 Hz63 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 1.5 kW 50 Hz1.5 kW 60 HzVariants 3
NOVADRY ND 100Pumping speed 96 m³/h 50 Hz96 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 2.2 kW 50 Hz2.2 kW 60 HzVariants 3NOVADRY ND 160Pumping speed 138 m³/h 50 Hz138 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 3 kW 50 Hz3 kW 60 HzVariants 3NOVADRY ND 200Pumping speed 175 m³/h 50 Hz175 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 4 kW 50 Hz4 kW 60 HzVariants 3Leybold RUVAC WS/WSU series 8 models
RUVAC WS 251Pumping speed 210 m³/h 50 Hz251 m³/h 60 HzUltimate pressure 8 × 10-4 mbarRated motor power 1.1 kW 50 Hz1.4 kW 60 HzVariants 2
RUVAC WSU 251Pumping speed 210 m³/h 50 Hz251 m³/h 60 HzUltimate pressure 8 × 10-4 mbarRated motor power 1.1 kW 50 Hz1.4 kW 60 HzVariants 4
RUVAC WS 501Pumping speed 410 m³/h 50 Hz530 m³/h 60 HzUltimate pressure 0.04 mbarRated motor power 2.2 kW 50 Hz2.4 kW 60 HzVariants 2
RUVAC WSU 501Pumping speed 410 m³/h 50 Hz530 m³/h 60 HzUltimate pressure 0.04 mbarRated motor power 2.2 kW 50 Hz2.4 kW 60 HzVariants 5
RUVAC WS 1001Pumping speed 800 m³/h 50 Hz1,000 m³/h 60 HzUltimate pressure 0.04 mbarRated motor power 4 kW 50 Hz4.4 kW 60 HzVariants 3
RUVAC WSU 1001Pumping speed 800 m³/h 50 Hz1,000 m³/h 60 HzUltimate pressure 0.04 mbarRated motor power 4 kW 50 Hz4.4 kW 60 HzVariants 6
RUVAC WS 2001Pumping speed 1,850 m³/h 50 Hz2,100 m³/h 60 HzUltimate pressure 0.04 mbarRated motor power 7.5 kW 50 Hz8.5 kW 60 HzVariants 11
RUVAC WSU 2001Pumping speed 1,850 m³/h 50 Hz2,100 m³/h 60 HzUltimate pressure 0.04 mbarRated motor power 7.5 kW 50 Hz8.5 kW 60 HzVariants 15Leybold SCREWLINE series 2 models
SCREWLINE SP 630Pumping speed 630 m³/h 50 Hz630 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 6SCREWLINE SP 630 FPumping speed 630 m³/h 50 Hz630 m³/h 60 HzUltimate pressure 0.01 mbarRated motor power 15 kW 50 Hz15 kW 60 HzVariants 11Leybold SOGEVAC series 23 models
SOGEVAC SV 10 BPumping speed 9.5 m³/h 50 Hz11.5 m³/h 60 HzUltimate pressure 1.5 mbarRated motor power 0.55 kW 50 Hz0.75 kW 60 HzVariants 3
SOGEVAC SV 16 DPumping speed 14.5 m³/h 50 Hz17 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 0.75 kW 50 Hz0.9 kW 60 HzVariants 13SOGEVAC SV 16 DIPumping speed 14.5 m³/h 50 Hz17 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 0.75 kW 50 Hz0.9 kW 60 HzVariants 4
SOGEVAC SV 16 BPumping speed 15 m³/h 50 Hz17 m³/h 60 HzUltimate pressure 1 mbarRated motor power 0.55 kW 50 Hz0.75 kW 60 HzVariants 7
SOGEVAC SV 25 BPumping speed 22.5 m³/h 50 Hz25 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 0.9 kW 50 Hz1.1 kW 60 HzVariants 12
SOGEVAC SV 25 DPumping speed 22.5 m³/h 50 Hz25.5 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 0.75 kW 50 Hz0.9 kW 60 HzVariants 15
SOGEVAC SV 28 BIPumping speed 23 m³/h 50 Hz27 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 0.55 – 0.75 kW 50 Hz0.66 – 1.1 kW 60 HzVariants 2SOGEVAC SV 40 BI FCPumping speed 36 m³/h 50 Hz36 m³/h 60 HzUltimate pressure 0.2 mbarRated motor power 1.5 kW 50 Hz1.5 kW 60 HzVariants 3SOGEVAC SV 55 BI²Pumping speed 36 m³/h 50 Hz36 m³/h 60 HzUltimate pressure 0.2 mbarRated motor power Variants 4
SOGEVAC SV 40 BPumping speed 38.5 m³/h 50 Hz47 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 1.1 kW 50 Hz1.5 kW 60 HzVariants 25
SOGEVAC SV 40 BIPumping speed 40 m³/h 50 Hz48 m³/h 60 HzUltimate pressure 0.05 mbarRated motor power 1.1 – 1.3 kW 50 Hz1.3 – 1.6 kW 60 HzVariants 3SOGEVAC SV 65 BI FCPumping speed 50 m³/h 50 Hz50 m³/h 60 HzUltimate pressure 0.2 mbarRated motor power 1.5 kW 50 Hz1.5 kW 60 HzVariants 2SOGEVAC SV 70 BI²Pumping speed 50 m³/h 50 Hz50 m³/h 60 HzUltimate pressure 0.2 mbarRated motor power Variants 2
SOGEVAC SV 65 BPumping speed 54 m³/h 50 Hz64 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 1.5 kW 50 Hz1.8 kW 60 HzVariants 22
SOGEVAC SV 100 BPumping speed 87.5 m³/h 50 Hz105 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 2.2 kW 50 Hz3.5 kW 60 HzVariants 31SOGEVAC SV 120 BI FCPumping speed 90 – 100 m³/h 50 Hz90 – 100 m³/h 60 HzUltimate pressure 0.2 mbarRated motor power 2.2 kW 50 Hz2.2 kW 60 HzVariants 2
SOGEVAC SV 120 BPumping speed 110 m³/h 50 Hz122 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 2.4 kW 50 Hz3.2 kW 60 HzVariants 12
SOGEVAC SV 220 BPumping speed 180 m³/h 50 Hz220 m³/h 60 HzUltimate pressure 0.08 mbarRated motor power 4.5 kW 50 Hz4.8 kW 60 HzVariants 8
SOGEVAC SV 300 BPumping speed 240 m³/h 50 Hz290 m³/h 60 HzUltimate pressure 0.08 mbarRated motor power 5.5 kW 50 Hz6.3 kW 60 HzVariants 45
SOGEVAC SV 320 BPumping speed 284 m³/h 50 Hz330 m³/h 60 HzUltimate pressure 0.08 mbarRated motor power 7.5 kW 50 Hz7.5 kW 60 HzVariants 6
SOGEVAC SV 570 BPumping speed 470 m³/h 50 HzUltimate pressure 0.08 mbarRated motor power 11 kW 50 Hz11 – 13.2 kW 60 HzVariants 6
SOGEVAC SV 630 BPumping speed 640 m³/h 50 Hz755 m³/h 60 HzUltimate pressure 0.08 mbarRated motor power 15 kW 50 Hz18.5 kW 60 HzVariants 34
SOGEVAC SV 750 BPumping speed 755 m³/h 50 HzUltimate pressure 0.08 mbarRated motor power 18.5 kW 50 HzVariants 15No model matches these filters.
Atlas Copco DWS VSD+ series 6 models
Atlas Copco DZS VSD+ series 5 models
Atlas Copco GHS VSD+ series 21 models
Becker KVT series 4 models
Becker U series 8 models
Becker VT series 7 models
Busch COBRA Industry series 36 models
Busch MINK series 32 models
Busch PANDA/PUMA series 26 models
Busch R5 series 58 models
Leybold CLAWVAC series 5 models
Leybold DRYVAC series 9 models
Leybold NOVADRY series 4 models
Leybold RUVAC WS/WSU series 8 models
Leybold SCREWLINE series 2 models
Leybold SOGEVAC series 23 models
Models a manufacturer no longer carries in its current range are listed in its “Outdated models” section.
Industries
Laminating, pressing and composites: where the manufacturers name it
The manufacturers list these uses on their own pages.
Woodworking
Becker names laminating, coating and membrane pressing in furniture and door making with U5, KVT and VT; Busch names R5 for laminating presses that press veneers firmly onto panels; Elmo Rietschle names the even contact pressure in laminating and veneering; Leybold lists NOVADRY for 3D laminating presses and CLAWVAC and NOVADRY for bonding and pressing; Atlas Copco names GHS VSD+ for wood lamination.
Solar and photovoltaics
Atlas Copco describes the laminator, which draws the air out of the module, with approx. 200 mbar(a) and names DWS VSD+ and DZS VSD+; for bonding the layers into the module, Busch names COBRA, PANDA WV, MINK MM and R5; according to Leybold, the vacuum degasses the polymer during bonding to prevent bubbles (SCREWLINE, DRYVAC, CLAWVAC, RUVAC WSU 2001); Pfeiffer Vacuum lists laminating without a description.
Plastics and recycling
For resin transfer moulding (RTM) and vacuum bagging, Busch names MINK and R5; Leybold describes how vacuum compacts laminates and removes trapped air (SOGEVAC B, CLAWVAC B, VARODRY); Edwards lists bagging, infusion, VARTM and pultrusion for composites without a description.
Energy
In rotor blade production, according to Busch, the resin is drawn through the layers under the film (MINK, R5); Edwards names wet and dry pump carts that draw the resin into the fibres; Elmo Rietschle names the vacuum in the laminating cycle of solar modules.
Glass, ceramics and stone
For pressing and forming stone, Atlas Copco describes vibrating under vacuum, evacuating the press and holding the stone on the cutting table; as a contaminant, Atlas Copco names styrene.
Environmental and wastewater
Elmo Rietschle also lists solar module lamination under environmental technology: the vacuum works in the laminating cycle.
Frequently asked questions
Laminating, pressing and composites: frequently asked questions
How does a vacuum membrane press work?
The workpiece with veneer or film lies on the mould, with a membrane above it. The air underneath is extracted, and the air pressure presses the membrane with the veneer evenly onto every contour – Becker and Elmo Rietschle name this even contact pressure as the task of the vacuum. For this, Becker names a deep, stable ultimate vacuum and the series U5, KVT and VT.
Which vacuum pump for membrane presses and laminating presses?
For laminating, coating and membrane pressing, Becker names U5 (40–120 m³/h), KVT and VT (25–145 m³/h). Busch names R5 for laminating presses, Atlas Copco GHS VSD+ for wood lamination, and Leybold lists NOVADRY for 3D laminating presses as well as CLAWVAC and NOVADRY for bonding and pressing.
How much vacuum is needed for laminating?
For the solar module laminator, Atlas Copco names approx. 200 mbar(a). Becker gives 100–150 mbar for KVT/VT and 1 to ≤ 0.1 mbar for U5. For vacuum infusion, Leybold speaks of controlled pressure.
Oil-free or oil-lubricated for laminating?
Both are named. Becker lists the oil-lubricated U5 alongside the dry-running rotary vane vacuum pumps KVT and VT, Busch the oil-lubricated R5 alongside the dry MINK (claw) and COBRA (screw). For solar lamination, Leybold names the dry SCREWLINE, DRYVAC and CLAWVAC, and for composites also SOGEVAC B; for solar modules, Atlas Copco names the dry DWS VSD+ and DZS VSD+, and for wood the oil-lubricated screw vacuum pump GHS VSD+.
Which vacuum pump for laminating solar modules?
Atlas Copco names DWS VSD+ and DZS 100–400 VSD+ A at approx. 200 mbar(a), Busch COBRA (DS, NC, NX), PANDA WV, MINK MM and R5, Leybold SCREWLINE SP 630, DRYVAC, CLAWVAC and RUVAC WSU 2001. According to Leybold, the vacuum degasses the polymer when the module is bonded, so that no bubbles form; Busch describes the bonding of the layers into the module.
How does vacuum bagging work?
The fibre layers lie on the mould, a film over them is sealed and the space underneath is evacuated. Leybold describes the compaction and de-aeration of the laminate during curing; according to Leybold, vacuum infusion involves evacuating, infusing resin and compacting under controlled pressure. Busch names MINK and R5 for vacuum bagging.
Which vacuum pump for resin infusion and RTM?
Busch names MINK and R5 for resin transfer moulding (RTM), and likewise for rotor blade production by vacuum bagging, in which, according to Busch, the resin is drawn through the layers under the film. Edwards names wet and dry pump carts for the resin infusion of rotor blades. For resin injection (RTM), Leybold describes that air and moisture are removed so that the mould is filled without bubbles, and names SOGEVAC B, CLAWVAC B and VARODRY for composites.
Why do bubbles form when laminating, and how does vacuum help?
Air that remains between the layers or in the adhesive shows up as a bubble after curing. According to Leybold, the vacuum compacts the laminate and removes trapped air; in the solar module, it degasses the polymer during bonding. For RTM, Leybold names the removal of air and moisture before the mould is filled.
What pumping speed does a membrane press need?
For laminating, coating and membrane pressing, Becker names U5 with 40–120 m³/h and KVT/VT with 25–145 m³/h.
Can stone be pressed under vacuum?
Yes. In stone processing, Atlas Copco describes vibrating under vacuum, evacuating the press and holding the stone on the cutting table; as a contaminant for the pump, Atlas Copco names styrene.
A single pump or a central vacuum system?
A central system in a room of its own keeps noise and heat away from production and matches its output to the demand. Central vacuum systems are planned and built by Eugen Theis Vakuum, a company of the Ehrler & Beck group – more under Central Vacuum.
Does Ehrler & Beck also supply spare parts and service?
Yes. Ehrler & Beck offers original spare parts and accessories as well as maintenance and repair.
Which pump suits your process?
Tell us the application, the medium and the volume – we advise you on selection, spare parts and service.
