RUVAC WS 501 3Ph 200/230/400 V 50 Hz, 200-208/265/460 V 60 Hz; Mineral oil LEYBONOL LVO 130

Leybold RUVAC WS 501 – Roots pump with canned motor and 505 m³/h nominal pumping speed

The RUVAC WS 501 doubles the nominal pumping speed of size 251 with the same DN 63 ISO-K connection flanges. The air-cooled canned motor delivers 2.2 kW at 50 Hz and is temperature-monitored via the stator winding. Leybold gives the performance data with a SOGEVAC SV 200 as the backing pump; the permissible pressure difference in continuous operation is 80 mbar. The nominal pumping speed is 505 m³/h at 50 Hz and 606 m³/h at 60 Hz, the maximum effective pumping speed 410 and 530 m³/h respectively. The pump measures 752 × 310 × 340 mm, weighs 130 kg and is connected via DN 63 ISO-K; the noise level is below 63 dB(A).

Typical applications

The RUVAC WS/WSU work as boosters in front of an oil-sealed or dry backing pump. Leybold recommends the canned-motor series for applications requiring a high pumping speed between 10⁻² and 10⁻⁴ mbar, for processes in which neither air may enter nor pumped medium escape, and for the extraction or transfer of high-purity gases. Typical applications of the RUVAC series are heat treatment and furnace construction, metallurgy, large-area coating, load-lock chambers and crystal pulling systems for the semiconductor and solar industries.

Variants of the RUVAC WS 501

The RUVAC WS 501 is available from Ehrler & Beck in two variants (part numbers 11732, 11737). All variants have the same canned motor with a motor power of 2.2 kW at 50 Hz to 2.4 kW at 60 Hz for mains voltages from 200 V to 460 V. They differ mainly in the oil filling: mineral oil LEYBONOL LVO 130, PFPE LEYBONOL LVO 400.

Features of the RUVAC WS/WSU

• Air-cooled canned motor: no shaft feedthrough to atmosphere, integral leak rate ≤ 1 × 10⁻⁴ mbar·l/s
• Temperature monitoring in the motor's stator winding; separate fan under the fan cover
• Operation on 50 and 60 Hz mains; higher speeds are possible with a frequency converter
• All elastomer seals made of FPM (FKM)
• WSU: integrated pressure equalisation line with differential pressure valve as overload protection
• Supplied for vertical pumping direction; conversion to horizontal pumping direction possible by the customer
• Oil filling supplied separately; inlet flange with dirt trap, pump vented with nitrogen for corrosion protection

Pumping speed 50Hz	410
Pumping speed 60Hz	530
Ultimate pressure	0.04
Rated motor power 50Hz	2.2
Rated motor power 60Hz	2.4
Weight	130
Length	75.2
Width	31
Height	34
Inlet connection flange	DN 63 ISO-K
Outlet connection flange	DN 63 ISO-K
Noise level	63 dB(A)
Cooling method	Air cooling
Oil type	LEYBONOL LVO 130, LEYBONOL LVO 400

Additional technical data