GHS 1900 VSD+ 3Ph 380-460 V 50/60 Hz, air-cooled, standard version, mineral oil, IE3 motor (Siemens, being phased out); UL/CE approval

Atlas Copco GHS 1900 VSD+ – variable-speed screw pump of the GHS 1300–1900 VSD+ series

The GHS 1900 VSD+ achieves a nominal pumping speed of 1810 m³/h (data sheet: maximum displacement 1811 m³/h at 600–6200 rpm at the motor shaft) and an ultimate pressure of 0.35 mbar(a). The frequency range is 20–207 Hz, the average absorbed power at minimal speed 2.7 kW. With the IE5 permanent magnet motor used since April 2025 the nominal motor power is 37 kW (versions with IE3 motor: 37 kW). All three sizes share the canopy of 1420 × 1585 × 1467 mm (L × W × H); according to the brochure the GHS 1900 VSD+ weighs 1143 kg. Gas inlet DN 150, gas outlet DN 100, noise level 65–80 dB(A), oil capacity 40 l.

Only as much power as needed

The variable speed drive (VSD+) with Atlas Copco's own Neos inverter matches the flow to the actual vacuum demand; Atlas Copco quotes energy savings of up to 50 % compared with fixed-speed vacuum technologies. The inlet control valve regulates the pressure together with the speed, the Elektronikon controller (Mk5 Graphic) monitors the pump and integrates it into plant management systems. The patented oil retention system keeps the oil content of the exhaust air below 3 mg/m³.

Applications according to Atlas Copco

Holding, lifting and moving (pick and place, packaging, woodworking), forming and shaping (plastics and white goods, packaging materials, glass, wood/lamination), preserving (meat and poultry packaging, MAP, canning) and humid processes (roof tile and brick manufacture, pipeline drying, salad cooling).

Versions of the GHS 1900 VSD+

Ehrler & Beck offers the GHS 1900 VSD+ in 21 versions, all for 3Ph 380-460 V 50/60 Hz. They differ in cooling (air or water), version (standard, Humid for processes with a high water vapour content and ER with energy recovery – according to the data sheet up to 31.2 kW of recoverable heat via water at 5 mbar), oil (mineral or synthetic) and motor: the 7 article numbers with the Leroy Somer IE5 motor are the versions supplied since April 2025 (pump without UL/CE marking, motor with CE); the 14 article numbers with the Siemens IE3 motor (CN or UL/CE approval) have been phased out by Atlas Copco since 2025 and are only available from stock. The pumps are built at the Qingdao plant.

Features of the GHS 1300–1900 VSD+

• Variable speed drive (VSD+) with Neos inverter and inlet control valve
• Elektronikon Mk5 Graphic controller with connection to plant management systems
• IE5 permanent magnet motor (current versions)
• Oil carry-over below 3 mg/m³
• Air- or water-cooled; ER version with energy recovery (according to the brochure up to 75 % of the electrical energy usable as heat)
• Plug-and-play installation on a small footprint

Pumping speed 50Hz	1,810
Pumping speed 60Hz	1,810
Ultimate pressure	0.35
Rated motor power 50Hz	37
Rated motor power 60Hz	37
Motor efficiency class	IE3
Weight	1,143
Length	142
Width	158.5
Height	146.7
Inlet connection flange	DN 150
Outlet connection flange	DN 100
Noise level	80 dB(A)
Cooling method	Air cooling, Water cooling
Oil type	VACUUM FLUID BASIC

Additional technical data