Edwards EXS160Pumping speed 160 m³/hUltimate pressure 0.01 mbar
Edwards EXS750 3Ph 380–460 V 50/60 Hz (HV), side outlet, without castors (Edwards designation EXS750 HV MD SI)
The Edwards EXS750 is a dry screw vacuum pump with a pumping speed of 740 m³/h and an ultimate pressure below 0.01 mbar. The EXS series builds on the GXS screw technology and focuses on simple operation and low operating costs. Ehrler & Beck advises on selection and service.
Request a quote for this product Read more
- Pumping speed 740 m³/h 50 Hz 740 m³/h 60 Hz
- Ultimate pressure 0.01 mbar
- Rated motor power 22 kW 50 Hz 22 kW 60 Hz
| Variant | Part number |
|---|---|
| 3Ph 380–460 V 50/60 Hz (HV), side outlet, without castors (Edwards designation EXS750 HV MD SI) (selected) | A41870900 |
| 3Ph 380–460 V 50/60 Hz (HV), side outlet, with castors (Edwards designation EXS750 HV MD SI CA) | A41870902 |
| 3Ph 380–460 V 50/60 Hz (HV), rear outlet, with castors (Edwards designation EXS750 HV MD RE CA) | A41870904 |
Edwards EXS750 – dry screw vacuum pump
The EXS series uses the same screw technology as the GXS pumps but is designed for simplicity and robustness. The EXS750 reaches a typical maximum pumping speed of 740 m³/h and an ultimate pressure below 0.01 mbar; the motor power is 22 kW. A built-in frequency converter allows speed control and energy savings.Features
- Tapered screw with variable pitch (Quinby profile); rotors supported at both ends for very low vibration and reliable starting
- Non-contact labyrinth shaft seals with oil barrier; the shaft seal purge keeps oil out of the pumping chamber
- Additional blow-off valve for higher pumping speed in rough vacuum and shorter pump-down times
- Constant cooling water flow; gas ballast adjustable by hand
- Modbus RTU as standard, digital and analogue inputs and outputs; optional communication cards for further fieldbuses
Typical applications
Edwards names lithium-ion battery production (electrode drying, electrolyte filling, formation), metallurgy (vacuum brazing, electron beam welding, nitriding, low-pressure carburising, sintering, investment casting, steel degassing), plasma processes, solar (crystal pulling, laminating), coating and the evacuation of vacuum chambers.Versions of the Edwards EXS750
The 3 versions differ in the installation (outlet at the side or rear, with or without castors).Advice and service
Ehrler & Beck supports you in selecting the right version and accessories and carries out maintenance and repair.| Pumping speed 50Hz | 740 |
|---|---|
| Pumping speed 60Hz | 740 |
| Ultimate pressure | 0.01 |
| Rated motor power 50Hz | 22 |
| Rated motor power 60Hz | 22 |
| Weight | 650 |
| Length | 165 |
| Width | 56 |
| Height | 64.2 |
| Inlet connection flange | ISO100 |
| Outlet connection flange | NW50 |
| Noise level | 70 dB(A) |
| Cooling method | Water cooling |
| Oil type | PFPE |
Additional technical data
| Technical data | Value |
|---|---|
| Design | Dry screw vacuum pump, water-cooled, with built-in frequency converter |
| Typical max. pumping speed | 740 m³/h |
| Ultimate pressure (shaft seal purge only) | < 0.01 mbar |
| Max. continuous inlet pressure | 1000 mbar (speed can be limited) |
| Max. outlet pressure | 1.2 bar absolute |
| Rotor speed | 6600 min⁻¹ |
| Motor power | 22 kW |
| Power consumption at ultimate pressure | 10.5 kW |
| Power consumption at full load | 22 kW |
| Supply | 3Ph 380–460 V ±10 %, 50/60 Hz |
| Rated current | 380–460 V: 38–31 A |
| Dimensions L × W × H (housing) | 1650 × 560 × 642 mm |
| Mass (without packaging) | 650 kg |
| Sound pressure level (at ultimate pressure, outlet piped) | < 70 dB(A) |
| Vibration at the inlet | < 1.5 mm/s |
| Connections | Inlet ISO100, outlet NW50 |
| Lubricant | PFPE Drynert 25/6 (recommended), alternatively Fomblin 25/6 or Krytox 1525; 2.8 l |
| Cooling water | Connections G ⅜" (female thread), 5–40 °C, max. 6.9 bar gauge, minimum flow 12–19 l/min (depending on the ambient and water temperature) |
| Purge gas | Connection ½" BSP (female thread), 2.5–6.9 bar gauge, ISO 8573 class 2; shaft seal purge 12 slm, gas ballast 0–130 slm |
| Ambient temperature | 5 to 40 °C, installation altitude up to 2000 m |
| Type of protection | IP2X |
| Materials (in contact with the process) | Stator, rotors and shafts ductile iron; seals PTFE and fluoroelastomer |
| Product name | Part number |
|---|---|
| XTRAGRADE ADVANCED 276, 1 litres | H11041111 |
| Control cabinet ventilation filter kit | 3490790547 |
| Blow-off valve service kit | 3490790545 |
| Product name | Part number |
|---|---|
| Inlet dust filter ISO100 | M58810101 |
| Inlet gas/liquid separator ISO100 | M58810121 |
| Outlet check valve NW50 | A50790000 |
| Cleanable silencer NW50 | M58810141 |
| Cleanable silencer NW50 with bottom drain | M58810143 |
| Inlet valve kit ISO100 | M58810145 |
| Kit for operation without purge gas (purge free kit) | M58810144 |
| Quick coupling ½" for cooling water | 3002615139 |
| Booster mounting kit EXS750 (for EH2600 and EH4200) | M58810148 |
| Castors | M58810149 |
| Multi-protocol card (without housing) | M58810169 |
| Multi-protocol module (with housing) | M58810170 |
| Profibus module for GA500 | M58810147 |
| EXSEye communication cable (DB9 to type C) | M58810153 |
Edwards EXS160Pumping speed 160 m³/hUltimate pressure 0.01 mbarEdwards EXS250Pumping speed 250 m³/hUltimate pressure 0.01 mbarEdwards EXS450Pumping speed 450 m³/hUltimate pressure 0.01 mbarEdwards EXS160/1750Pumping speed 1,160 m³/hUltimate pressure 1 × 10-3 mbarEdwards EXS250/2600Pumping speed 1,900 m³/hUltimate pressure 1 × 10-3 mbarEdwards EXS450/2600Pumping speed 2,130 m³/hUltimate pressure 1 × 10-3 mbarEdwards EXS750/2600Pumping speed 2,280 m³/hUltimate pressure 1 × 10-3 mbarEdwards EXS450/4200Pumping speed 3,180 m³/hUltimate pressure 1 × 10-3 mbarEdwards EXS750/4200Pumping speed 3,450 m³/hUltimate pressure 1 × 10-3 mbarEdwards EXS750/8000Pumping speed 5,760 m³/hUltimate pressure 1 × 10-3 mbar