Edwards EDS200Pumping speed 210 m³/hUltimate pressure 0.05 mbar
Edwards EDS300 3Ph 380–400 V 50 Hz, 230/460 V 60 Hz, operation at 60 Hz, air-cooled (Air Blast) (Europe/USA/China)
The Edwards EDS300 is a dry screw vacuum pump for industrial applications with a pumping speed of more than 280 m³/h and an ultimate pressure below 0.01 mbar. It is available with direct water cooling or air cooling. Ehrler & Beck advises on selection, accessories and service.
Request a quote for this product Read more
- Pumping speed 280 m³/h 50 Hz 280 m³/h 60 Hz
- Ultimate pressure 0.01 mbar
- Rated motor power 7.5 kW 50 Hz 7.5 kW 60 Hz
| Variant | Part number |
|---|---|
| 3Ph 380–400 V 50 Hz, 230/460 V 60 Hz, operation at 50 Hz, direct water-cooled (Europe/USA/China) | A41830945 |
| 3Ph 380–400 V 50 Hz, 230/460 V 60 Hz, operation at 60 Hz, direct water-cooled (Europe/USA/China) | A41830946 |
| 3Ph 200 V 50 Hz, 200/380 V 60 Hz, operation at 50 Hz, direct water-cooled (Asia) | A41830934 |
| 3Ph 200 V 50 Hz, 200/380 V 60 Hz, operation at 60 Hz, direct water-cooled (Asia) | A41830936 |
| 3Ph 575 V, operation at 60 Hz, direct water-cooled (Canada) | A41830957 |
| 3Ph 380–400 V 50 Hz, 230/460 V 60 Hz, operation at 50 Hz, air-cooled (Air Blast) (Europe/USA/China) | A41831945 |
| 3Ph 380–400 V 50 Hz, 230/460 V 60 Hz, operation at 60 Hz, air-cooled (Air Blast) (Europe/USA/China) (selected) | A41831946 |
| 3Ph 200 V 50 Hz, 200/380 V 60 Hz, operation at 50 Hz, air-cooled (Air Blast) (Asia) | A41831934 |
| 3Ph 200 V 50 Hz, 200/380 V 60 Hz, operation at 60 Hz, air-cooled (Air Blast) (Asia) | A41831936 |
| 3Ph 575 V, operation at 60 Hz, air-cooled (Air Blast) (Canada) | A41831957 |
Edwards EDS300 – dry screw vacuum pump for industry
The heart of the EDS pumps is a tapered screw mechanism with variable pitch. The EDS300 delivers more than 280 m³/h and reaches an ultimate pressure below 0.01 mbar; at ultimate pressure it draws only 4.5 kW.Features
- Direct water cooling or air cooling (Air Blast) with heat exchanger
- Directly mounted motors for every region
- Simple, robust shaft seal purge system; gas ballast with atmospheric air
- Simple thermal protection; optional enclosure
- Extensive standard accessories
Typical applications
Edwards names lithium-ion batteries, automotive painting, freeze drying, coating of industrial glass, solar cell production, heat treatment, brazing, thin-film deposition, plastics extrusion, pharmaceuticals and renewable energies.Versions of the Edwards EDS300
The 10 versions differ in cooling, mains voltage and frequency. The markets (Europe/USA/China, Asia, Canada) come from the Edwards ordering table.Advice and service
Ehrler & Beck supports you in selection, supplies accessories and carries out maintenance and repair.| Pumping speed 50Hz | 280 |
|---|---|
| Pumping speed 60Hz | 280 |
| Ultimate pressure | 0.01 |
| Rated motor power 50Hz | 7.5 |
| Rated motor power 60Hz | 7.5 |
| Motor efficiency class | IE3 |
| Weight | 420 |
| Inlet connection flange | ISO63 |
| Outlet connection flange | NW40 |
| Noise level | 71 dB(A) |
| Cooling method | Air cooling, Water cooling |
| Oil type | ULTRAGRADE Endurance Extend 110 |
Additional technical data
| Technical data | Value |
|---|---|
| Design | Dry screw vacuum pump with tapered variable-pitch screw, direct water-cooled or air-cooled (Air Blast) |
| Pumping speed (without gas ballast) | > 280 m³/h |
| Ultimate pressure (partial pressure) | < 0.01 mbar |
| Max. permissible inlet pressure | 1013 mbar |
| Max. continuous outlet pressure | 1200 mbar absolute |
| Water vapour capacity without condensation (10–50 mbar) | 2–10 kg/h |
| Motor power | 7.5 kW |
| Power consumption at ultimate pressure | 4.5 kW |
| Rotor speed | 6600 min⁻¹ (min. 1200 min⁻¹) |
| Supply | 3Ph 200–230 V or 380–460 V ±10 % or 575 V ±10 %, 50/60 Hz (depending on the version) |
| Sound pressure level (at ultimate pressure, without silencer) | ≤ 71 dB(A) |
| Vibration | 2 mm/s |
| Type of protection | water-cooled IP54, air-cooled IP20 |
| Ambient temperature | 5 to 40 °C |
| Lubrication | Ultragrade Endurance Extend 110 or Drynert 25/6; gearbox 1250 ml, inlet side 250 ml |
| Connections | Inlet ISO63, outlet NW40 |
| Weight (approx.) | 420 kg |
| Cooling water | Connection G ½" (female thread), 5–35 °C, max. 7 bar gauge, 0.2 bar differential pressure for at least 8 l/min |
| Purge gas | G ¼", 4–10 bar gauge; shaft seal purge 12 slm, gas ballast adjustable 0–50 slm |
| Product name | Part number |
|---|---|
| Temperature control valve (TCV) for direct-cooled EDS | A41890000 |
| Temperature control valve (TCV) for indirectly cooled EDS | A41890001 |
| Solenoid valve accessories | A41891001 |
| Outlet pressure transmitter | A41894000 |
| PT100 temperature transmitter, stator | A41895000 |
| PT100 temperature transmitter, outlet | A41895001 |
| Plug kit for the blow-off valve (BoV) | A41897000 |
| EDS dry silencer (EDS200/300) | A41896009 |
| Industrial enclosure (EDS200/300) | A41896005 |
Edwards EDS200Pumping speed 210 m³/hUltimate pressure 0.05 mbarEdwards EDS480Pumping speed 460 m³/hUltimate pressure 0.01 mbar
