RUVAC WA 2001 3Ph 200-240/380-460 V 50/60 Hz, IE3 motor

The Leybold RUVAC WA 2001 is an air-cooled Roots vacuum pump without a pressure equalisation line: 2050 m³/h nominal pumping speed at 50 Hz, 1850 m³/h maximum effective pumping speed and a 7.5 kW IE3 motor. Ehrler & Beck supplies the RUVAC WA 2001 in three variants with matching accessories, spare parts and service.

Request a quote for this product Read more

Pumping speed 1,850 m³/h 50 Hz 2,100 m³/h 60 Hz
Ultimate pressure 0.04 mbar
Rated motor power 7.5 kW 50 Hz 7.5 kW 60 Hz

Available variants
Variant	Part number
3Ph 200-240/380-460 V 50/60 Hz, IE3 motor (selected)	11750
without motor, prepared for IEC standard motor	11254
without motor, prepared for IEC standard motor	11254TE

Leybold RUVAC WA 2001 – Roots pump with 2050 m³/h nominal pumping speed

With 2050 m³/h nominal pumping speed, the RUVAC WA 2001 is the largest pump in the WA series. Because of the large displacement, the permissible pressure difference in continuous operation is limited to 50 mbar; the cut-in pressure is about 30 mbar. It is connected via DN 160 ISO-K; Leybold specifies the SOGEVAC SV 630 BF as the backing pump. The nominal pumping speed is 2050 m³/h at 50 Hz and 2460 m³/h at 60 Hz, the maximum effective pumping speed 1850 and 2100 m³/h respectively. The pump measures 1277 × 463 × 530 mm, weighs 446 kg and is connected via DN 160 ISO-K; the noise level is below 80 dB(A).

Typical applications

Roots pumps of the RUVAC series work as boosters in front of an oil-sealed or dry backing pump. Leybold lists heat treatment and furnace construction, metallurgy, large-area coating including architectural glass, load-lock chambers, high-speed food packaging, the evacuation of lamps, and crystal pulling systems for the semiconductor and solar industries as typical applications.

Variants of the RUVAC WA 2001

The RUVAC WA 2001 is available from Ehrler & Beck in three variants (part numbers 11750, 11254, 11254TE). The motor power of all versions with motor is 7.5 kW at 50 and 60 Hz; the mains voltage ranges from 200–240 V to 380–460 V. The pump is also available without a motor for customer IEC motors.

Features of the RUVAC WA/WAU

Air-cooled, flange-mounted three-phase standard motor of efficiency class IE3, easily exchangeable for customer motors
Shaft seals and elastomer seals made of FPM (FKM); seals and their housing easy to replace
WAU: integrated pressure equalisation line as overload protection at high pressures
Supplied for vertical pumping direction; conversion to horizontal pumping direction possible by the customer
LEYBONOL LVO 130 lubricant, filling supplied separately; inlet flange with seal and dirt trap
ATEX category 3i (inside) as standard, valid only for 50 Hz operation

Pumping speed 50Hz	1,850
Pumping speed 60Hz	2,100
Ultimate pressure	0.04
Rated motor power 50Hz	7.5
Rated motor power 60Hz	7.5
Motor efficiency class	IE3
Weight	446
Length	127.7
Width	46.3
Height	53
Inlet connection flange	DN 160 ISO-K
Outlet connection flange	DN 160 ISO-K
Noise level	80 dB(A)
Cooling method	Air cooling
Oil type	LEYBONOL LVO 130

Additional technical data

Technical data	Value
Nominal pumping speed	2050 m³/h (50 Hz) / 2460 m³/h (60 Hz)
Max. effective pumping speed	1850 m³/h (50 Hz) / 2100 m³/h (60 Hz) with backing pump SOGEVAC SV 630 BF
Ultimate partial pressure	< 8 × 10⁻³ mbar
Ultimate total pressure	< 4 × 10⁻² mbar (with backing pump SOGEVAC SV 630 BF)
Cut-in pressure	approx. 30 mbar
Max. permissible pressure difference in continuous operation	50 mbar
Leak rate, integral	≤ 5 × 10⁻⁴ mbar·l/s
Version	3Ph 200-240/380-460 V 50/60 Hz, IE3 motor
Motor power	7.5 kW (50/60 Hz), IE3
Mains voltage	200-240 V / 380-460 V, 50/60 Hz, 3-phase
Rated current 50 Hz	380-415 V (Y): 14.4 A; 220-240 V (Δ): 24.8 A; 200 V (YY): 27.6 A
Rated current 60 Hz	440-460 V (Y): 12.4 A; 380 V (Y): 14.0 A; 220 V (Δ): 24.2 A; 200 V (YY): 26.7 A
Motor speed 50 / 60 Hz	2900 / 3480 min⁻¹
Nominal pump speed 50 / 60 Hz	3000 / 3600 min⁻¹
Max. permissible speed	3600 min⁻¹
Motor protection class	IP 55
Thermal class	F
Oil filling bearing chamber, vertical pumping direction	4.2 l (initial filling) / 3.6 l
Oil filling bearing chamber, horizontal pumping direction	2.0 l (initial filling) / 1.8 l
Oil filling shaft seal housing	1.6 l
Lubricant	LEYBONOL LVO 130
Connection flanges	DN 160 ISO-K (pump flange PN 6 to DIN 2501 with collar flange)
Noise level	< 80 dB(A) at operating pressure < 0.1 mbar
Permissible ambient temperature	12 to 40 °C
Materials (in contact with gas)	Carbon steel, crNi steel, grey cast iron, FPM (FKM)
ATEX	Category 3i (inside), only for 50 Hz operation

Product name	Part number
Shaft seal replacement kit RUVAC WA/WAU 1001/2001	EK110002662
Major service kit RUVAC WA 2001	EK110002669
Seal kit RUVAC WA/WAU(H) 2001	19472

Product name	Part number
Loose flange with retaining ring DN 160 ISO-K (required for ISO-K connection)	26751T
Temperature sensor Pt 100	155010
Oil drain facility M 16 x 1.5 with straight drain coupling	19002
Oil drain facility M 16 x 1.5 with 90° drain coupling	20014271
Pressure switch PS 115 (stainless steel), adjustable	16004
Pressure switch adjustment	16005
Adapter M 16 x 1.5 – DN 16 KF (for PS 115)	16840
Elbow 90° DN 16 ISO-KF	18436
Centring ring Al with CR (neoprene) O-ring, DN 16 ISO-KF	18326
Clamping ring Al (ADC 12), DN 10/16 ISO-KF	18341
Switching amplifier SV 110, 230 V	16078
Frequency converter LEYTRONIC	14111000A004DGN
Frequency converter LEYTRONIC	14111000A003DGN
LEYBONOL LVO 130, 1 litre	L13001
LEYBONOL LVO 130, 5 litres	L13005
LEYBONOL LVO 130, 20 litres	L13020
LEYBONOL LVO 130, 208 litres	L13099