AWS 8000 without motor, ANSI flanges, grey cast iron, impeller stainless steel SS 304 (Stainless steel fitted)

Atlas Copco AWS 8000 – robust liquid ring pump for process vacuum

The AWS 8000 delivers up to 8100 m³/h and reaches 33 mbar(a). It is supplied without motor; the drive power is 200 kW. Inlet and outlet DN 300, operating water connection DN 65, dimensions 2020 × 1463 × 1928 mm (L × W × H), weight 3750 kg.

The workhorses of the liquid ring range

The AWS pumps work reliably from atmospheric pressure down to ultimate pressure and pump dry as well as humid gases. Inlet manifold and outlet separator are already fitted; the internal water recirculation saves operating water.

Applications of the range

Atlas Copco lists tyre manufacturing, EPS, filtration, drying, evaporation, pulp and paper, and the evisceration of poultry; in general, filtration, vacuum forming and rapid evacuation.

Variants of the AWS 8000

Ehrler & Beck supplies the AWS 8000 in grey cast iron, as a stainless steel fitted version (grey cast iron with stainless steel impeller), entirely in SS 304 or in SS 316L, in each case with DIN or ANSI flanges.

Features of the AWS range

• Single-stage, high-efficiency impeller, variable port for optimum efficiency at all inlet pressures
• Water as operating liquid: isothermal compression, insensitive to vapour, condensate, liquid carry-over and particles
• Inlet manifold and outlet separator as standard – small footprint
• Bearing design for tight clearances and better pumping capacity; mechanical seals as standard
• Internal water recirculation for lower water consumption; internal and external seal flushing possible
• Materials: grey cast iron, Stainless steel fitted, SS 304 or SS 316L; DIN or ANSI flanges

Pumping speed 50Hz	8,100
Ultimate pressure	33
Rated motor power 50Hz	200
Weight	3,750
Length	202
Width	146.3
Height	192.8
Inlet connection flange	ANSI 12"
Outlet connection flange	ANSI 12"
Cooling method	Water cooling
Oil type	Oil-free

Additional technical data