Oil-lubricated rotary vane vacuum pumps

Atlas Copco GVS series

The Atlas Copco GVS series at a glance: 9 models from the field of oil-lubricated rotary vane vacuum pumps – with technical data, variants and the option to send an enquiry.

View 9 modelsSend an enquiry

  • 9Models
  • 16–700m³/h pumping speed at 50 Hz
  • 0.1mbar lowest ultimate pressure
  • 0.75–15kW rated motor power at 50 Hz
Operating principle: Oil-lubricated rotary vane vacuum pumps (schematic drawing)
Operating principle: Oil-lubricated rotary vane vacuum pumps

Product overview

Products of the Atlas Copco GVS series

Use the filters on the left to narrow the models down by their key figures. Each row leads to the model with its technical data and variants.

GVS 16 APumping speed 16 m³/h 50 Hz19 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 0.75 kW 50 Hz0.9 kW 60 HzVariants 5
GVS 25 APumping speed 25 m³/h 50 Hz29 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 0.75 kW 50 Hz0.9 kW 60 HzVariants 4
GVS 40 APumping speed 44 m³/h 50 Hz53 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 1.1 kW 50 Hz1.5 kW 60 HzVariants 6
GVS 60 APumping speed 59 m³/h 50 Hz71 m³/h 60 HzUltimate pressure 0.5 – 1 mbarRated motor power 1.5 kW 50 Hz1.8 kW 60 HzVariants 6
GVS 100 APumping speed 98 m³/h 50 Hz117 m³/h 60 HzUltimate pressure 0.5 mbarRated motor power 2.2 kW 50 Hz3.5 kW 60 HzVariants 5
GVS 150 APumping speed 151 m³/h 50 Hz181 m³/h 60 HzUltimate pressure 0.1 – 4 mbarRated motor power 3.3 kW 50 Hz3.7 kW 60 HzVariants 3
GVS 220 APumping speed 200 m³/h 50 Hz240 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 4.5 kW 50 Hz5.1 kW 60 HzVariants 5
GVS 300 APumping speed 280 m³/h 50 Hz340 m³/h 60 HzUltimate pressure 0.1 – 1 mbarRated motor power 5.5 kW 50 Hz6.3 kW 60 HzVariants 6
GVS 630 APumping speed 700 m³/h 50 Hz840 m³/h 60 HzUltimate pressure 0.1 mbarRated motor power 15 kW 50 Hz18.5 kW 60 HzVariants 5

Model comparison

Spare parts and accessories for the GVS models are listed under Atlas Copco spare parts and accessories.

About the series

Technology and features

Operating principle

Rotary vane technology allows a technically simple design of vacuum pumps. A consistently high vacuum level in continuous operation is ensured by the circulating oil lubrication, perfectly matched materials and modern, precise manufacturing techniques. The oil separator with integrated oil return provides clean, oil-free exhaust air. A further advantage over other technologies is the low purchase cost.

The technology page shows the operating principle with an interactive drawing: Oil-lubricated rotary vane vacuum pumps.

Features of the series

  • Design: single-stage, oil-sealed, air-cooled; GVS 16 A to GVS 300 A with direct drive, GVS 630 A with belt drive
  • Continuous operation: at any inlet pressure between atmospheric pressure and ultimate pressure
  • Easy installation: compact, space-saving design
  • Quiet: low noise and vibration over the entire pressure range
  • As standard: gas ballast valve, non-return valve at the inlet and bypass valve in the exhaust filter
  • Low-maintenance: low wear thanks to optimally selected shaft speeds, low pump temperatures extend the service life of the oil

Manufacturer's data as given in the product descriptions of the individual models.

Frequently asked questions

Questions about the Atlas Copco GVS series

Which models does the Atlas Copco GVS series comprise?
The Ehrler & Beck catalogue lists 9 models of the series. The product overview names each model with its key figures and the number of its variants; the model page shows the technical data.
Which pumping speeds does the series cover?
At 50 Hz the models cover pumping speeds from 16 to 700 m³/h. The figure comes from the product data of the individual models; values for 60 Hz, where available, are given in the product overview.
What ultimate pressure do the models of the series reach?
Depending on the model, the ultimate pressure lies between 0.1 and 4 mbar. The figures on the page of the respective model are decisive.
How does the technology of the series work?
The series belongs to the field of oil-lubricated rotary vane vacuum pumps. The technology page explains the operating principle with an interactive drawing and names all series of this technology.
Does Ehrler & Beck supply spare parts and service for the Atlas Copco GVS series?
Yes. Ehrler & Beck supplies the models of the series as well as spare parts and accessories and takes care of maintenance and repair. For a quotation, an enquiry with the model or part number is all it takes.

Which model fits your process?

Tell us the gas to be conveyed, the working pressure and the flow rate you need – we will advise you on selection, spare parts and service.

Send an enquirySpare parts and accessoriesService