V-VCX 75

Elmo Rietschle V-VCX 75 – rotary vane vacuum pump for humid process gases

The V-VCX 75 delivers 70 m³/h at 50 Hz and 84 m³/h at 60 Hz and reaches an ultimate pressure of 3 mbar (abs.). The functional parts are more resistant to water vapour and solvents; the vanes are made of glass-fibre-reinforced epoxy resin. Flange-mounted motor and rotor supported on both sides; fine mesh filter, non-return valve on the suction side, gas ballast valve, protective hood and oil separator are standard.

Motor and dimensions

Elmo Rietschle supplies the V-VCX 75 with flange-mounted motors of 1.85 or 2.2 kW (50 Hz) or 2.2 or 2.6 kW (60 Hz). The overall length depends on the motor (660–680 mm); width 345 mm, height 298 mm. Vacuum connection G 1 1/4, exhaust outlet G 1 1/4, oil filling 3.0 l.

Use

The V-VCX is the variant of the V-VCS for applications with a lot of moisture or solvent vapours. Elmo Rietschle publishes separate information on water vapour tolerance (I 200).

Advice and service

Ehrler & Beck supports you in selecting size and motor, supplies accessories, oil and spare parts and carries out maintenance and repair.

Pumping speed 50Hz	70
Pumping speed 60Hz	84
Ultimate pressure	3
Weight	71
Length	68
Width	34.5
Height	29.8
Inlet connection flange	G 1 1/4
Outlet connection flange	G 1 1/4
Noise level	65 dB(A)
Cooling method	Air cooling

Convert units: vacuum and pressure units · Nm³/h to m³/h

Additional technical data