DURADRY DD 160Pumping speed 160 m³/hUltimate pressure 0.01 mbar
DURADRY DD 450 18100450V11CQV 3Ph 380-460 V 50/60 Hz, LEYBONOL LVO 410 (PFPE)
The Leybold DURADRY DD 450 is the largest dry-compressing screw vacuum pump in the DURADRY series: 450 m³/h peak pumping speed, ultimate pressure < 1 × 10⁻² mbar, water vapour capacity 34 kg/h. Ehrler & Beck supplies the DURADRY DD 450 with matching accessories and service.
Request a quote for this product Read more
- Pumping speed 450 m³/h 50 Hz 450 m³/h 60 Hz
- Ultimate pressure 0.01 mbar
- Rated motor power 11 kW 50 Hz 11 kW 60 Hz
| Variant | Part number |
|---|---|
| 3Ph 380-460 V 50/60 Hz, LEYBONOL LVO 410 (PFPE) (selected) | 18100450V11CQV |
Leybold DURADRY DD 450 – the high-performance model with high water vapour capacity
The DURADRY DD 450 delivers 450 m³/h peak pumping speed at < 1 × 10⁻² mbar ultimate pressure. Its 11 kW motor draws 11 kW at full load and 6.0 kW at ultimate pressure. At 34 kg/h, the water vapour capacity is ten times that of the smaller sizes; the manually adjustable gas ballast goes up to 130 l/min. The frame measures 1445 × 567 × 763 mm and weighs 570 kg; it is connected via DN 100 ISO-K and DN 63 ISO-K.Robust and quiet
Hermetically sealed system without oil leakage, stainless steel cooling system, protected shaft seals and bearings, and a noise level below 64 dB(A) with silencer – the DD 450 is designed for demanding industrial processes with high gas and vapour loads.Typical applications
Crystal pulling systems, large-area coating, battery drying, plasma cleaning and solar production.Variants of the DURADRY DD 450
The DURADRY DD 450 is available from Ehrler & Beck in one version (part number 18100450V11CQV). The motor power is 11 kW at 380–460 V (50/60 Hz). All versions are filled with PFPE lubricant LEYBONOL LVO 410; the weight is 570 kg.Features of the DURADRY series
- Patented screw rotor profile: dry compression, maximum rotor speed 6600 min⁻¹
- PFPE-ready: LEYBONOL LVO 410 lubricant for high temperatures, high oxygen content and mildly corrosive conditions
- Hermetically sealed: dynamic seal, no oil leakage
- Stable thermal management: stainless steel cooling system against corrosion
- Quiet: less than 64 dB(A) with silencer, low vibration
- Smart Drive: monitors rotor frequency and temperatures for self-protection
| Pumping speed 50Hz | 450 |
|---|---|
| Pumping speed 60Hz | 450 |
| Ultimate pressure | 0.01 |
| Rated motor power 50Hz | 11 |
| Rated motor power 60Hz | 11 |
| Weight | 570 |
| Length | 144.5 |
| Width | 56.7 |
| Height | 76.3 |
| Inlet connection flange | DN 100 ISO-K |
| Outlet connection flange | DN 63 ISO-K |
| Noise level | 64 dB(A) |
| Cooling method | Water cooling |
| Oil type | Oil-free |
Convert units: vacuum and pressure units · Nm³/h to m³/h
Additional technical data
| Technical data | Value |
|---|---|
| Peak pumping speed | 450 m³/h |
| Ultimate pressure (shaft seal purge gas only) | < 1 × 10⁻² mbar |
| Max. continuous inlet pressure | 1000 mbar (speed limited if necessary) |
| Max. exhaust back pressure | 1.2 bar (abs.) |
| Water vapour capacity | 34 kg/h |
| Rated motor power | 11 kW |
| Power consumption at full load | 11 kW |
| Power consumption at ultimate pressure | 6.0 kW |
| Mains voltage | 380-460 V ± 10 %, 50/60 Hz, 3-phase |
| Rated current | 19–26 A |
| Max. rotor speed | 6600 min⁻¹ |
| Lubricant | LEYBONOL LVO 410 (PFPE), filling quantity 1.8 l |
| Cooling | Water |
| Cooling water connection | G 3/8" female thread |
| Cooling water flow | 10 l/min |
| Cooling water temperature | 5 to 40 °C |
| Cooling water pressure, max. | 6.9 bar(g) |
| Purge gas connection | G 1/2" female thread |
| Purge gas pressure | 2.5 to 6.9 bar(g) |
| Shaft seal purge gas (continuous) | max. 12 l/min |
| Gas ballast (manually adjustable) | 0 to 130 l/min |
| Noise level | < 64 dB(A) with silencer |
| Vibration level at the inlet | < 1.5 mm/s |
| Permissible ambient temperature | 5 to 40 °C |
| Installation altitude, max. | 2000 m |
| Protection class of electrical system | IP2X (IEC 60529) |
| Materials in the gas path | Spheroidal graphite cast iron (pump, shafts, rotors), PTFE and fluoroelastomer (seals) |
| Product name | Part number |
|---|---|
| LEYBONOL LVO 410 (PFPE), 1 litre | L41001 |
| Cubicle vent filter kit DD 450 | GK1950830617 |
| Product name | Part number |
|---|---|
| Outlet non-return valve DN 63 ISO-K (disc, spring-loaded) | 112003A14 |
| Cleanable silencer DN 63 ISO-K for DD 450 | M58810160 |
| Inlet dust filter DN 100 ISO-K for DD 450 | M58810101 |
| Inlet liquid separator DN 100 ISO-K for DD 450 | M58810121 |
| Multi Ethernet card (PROFINET, Ethernet, EtherNet/IP) | 0017000176 |
| PROFIBUS DP module | 112005A78 |
| Relay module (digital output) | 112005A70 |
| External display (LCD operator panel) | 112005A80 |
DURADRY DD 160Pumping speed 160 m³/hUltimate pressure 0.01 mbarDURADRY DD 250Pumping speed 250 m³/hUltimate pressure 0.01 mbarDWS 450 VSD+Pumping speed 450 m³/hUltimate pressure 0.01 mbarEdwards EXS450Pumping speed 450 m³/hUltimate pressure 0.01 mbarEdwards GXS450Pumping speed 450 m³/hUltimate pressure 0.01 mbar
DRYVAC DV 500Pumping speed 380 – 460 m³/hUltimate pressure 0.01 – 0.05 mbarDWS 500Pumping speed 460 m³/hUltimate pressure 0.01 mbarEdwards EDS480Pumping speed 460 m³/hUltimate pressure 0.01 mbar