Compressors · Side channel compressors · FPZ

TS by FPZ

The TS by FPZ: 13 models – side channel compressors for pressure and suction operation, as the manufacturer offers them today. Flow rate 334–2,104 m³/h at 50 Hz, pressure difference up to 375 mbar, motor power 3–15 kW.

Go to the modelsSend an enquiry

  • 13models
  • 334–2,104 m³/hflow rate at 50 Hz
  • 375 mbarmax. pressure difference
  • 3–15 kWmotor power
Side channel compressors

Models

The models of the TS

ModelFlow rate 50 Hz (m³/h)Flow rate 60 Hz (m³/h)Max. pressure difference (mbar)Motor 50 Hz (kW)Motor 60 Hz (kW)Weight (kg)Sound pressure level (dB(A))Connection
K05 TS40849325033.54869.6G 3"
e05 TS47657525033.54966G 3"
K05-66 TS334–2354–4574.5G 2"
e05-66 TS42050623533.54469G 2"
K06 TS56267930044.855.574.8G 3"
e06 TS63977130044.85673G 3"
e06-66 TS58170119046.55276G 2"
e07 TS8349893255.56.510673G 4"
e08 TS1,0081,2103757.5912078.2G 4"
e09 TS1,3251,599375111314481G 5"
e10 TS1,5791,906275111315082G 5"
e11 TS1,8682,232300151718982G 5"
e12 TS2,1042,534250152219084G 5"

As of October 2026, all values from the documents of FPZ. A dash means: not published by the manufacturer. Flow rate and motor power at 50 Hz and 60 Hz respectively, overpressure as the model's maximum.

Side channel and radial blowers state the pressure difference: it applies as overpressure in pressure operation and as vacuum in suction operation.

FPZ offers every size with several motors; the table gives the smallest motor and the weight and sound pressure level with that motor. The maximum pressure difference applies across all motor sizes.

FPZ still keeps data sheets for K07 TS, K08 TS, K09 TS, K10 TS, K11 TS, K12 TS in its technical library; the current range flyer (06/2025) no longer lists these sizes.

About the series

Side channel compressors by FPZ

An impeller accelerates the air, which circulates several times in the side channel and builds up pressure – oil-free and with little pulsation. For large flow rates at small pressure differences; most side channel blowers work either as compressors or as vacuum generators.

The TS comprises 13 models; the table above gives for each model the data FPZ publishes. We do not carry compressors as individual products – the models of this series are available from Ehrler & Beck on request, with advice on the selection, original spare parts and service.

All compressor series of our manufacturers by design: compressors by technology.

Is the TS right for your application?

Tell us the flow rate, the overpressure and the medium – we advise you on the selection, on spare parts and on service.

Send an enquirySpare parts and accessoriesService