Compressors · Side channel compressors · FPZ

MD by FPZ

The MD by FPZ: 10 models – side channel compressors for pressure and suction operation, as the manufacturer offers them today. Flow rate 50–521 m³/h at 50 Hz, pressure difference up to 650 mbar, motor power 0.55–9.2 kW.

Go to the modelsSend an enquiry

  • 10models
  • 50–521 m³/hflow rate at 50 Hz
  • 650 mbarmax. pressure difference
  • 0.55–9.2 kWmotor power
Side channel compressors

Models

The models of the MD

ModelFlow rate 50 Hz (m³/h)Flow rate 60 Hz (m³/h)Max. pressure difference (mbar)Motor 50 Hz (kW)Motor 60 Hz (kW)Weight (kg)Sound pressure level (dB(A))Connection
e07 MD20926065033.55772G 2"
e08 MD25530165044.86573G 2"
e09 MD3263926255.56.58476G 4"
e10 MD3964756507.599377G 4"
e11 MD4585496507.599877G 4"
e12 MD5216236509.21110578G 4"
15DH MD50583000.550.6512.562G 3/4"
R20 MD60704000.750.91967G 1" 1/4
R30 MD911104251.11.32770G 1" 1/4
R40 MD1171375002.22.63571G 1" 1/4

As of October 2026, all values from the documents of FPZ. A dash means: not published by the manufacturer. Flow rate and motor power at 50 Hz and 60 Hz respectively, overpressure as the model's maximum.

Side channel and radial blowers state the pressure difference: it applies as overpressure in pressure operation and as vacuum in suction operation.

FPZ offers every size with several motors; the table gives the smallest motor and the weight and sound pressure level with that motor. The maximum pressure difference applies across all motor sizes.

FPZ still keeps data sheets for K07R MD, K08R MD, K09 MD, 10DL MD, K10 MD, K11 MD, K12 MD in its technical library; the current range flyer (06/2025) no longer lists these sizes.

About the series

Side channel compressors by FPZ

An impeller accelerates the air, which circulates several times in the side channel and builds up pressure – oil-free and with little pulsation. For large flow rates at small pressure differences; most side channel blowers work either as compressors or as vacuum generators.

The MD comprises 10 models; the table above gives for each model the data FPZ publishes. We do not carry compressors as individual products – the models of this series are available from Ehrler & Beck on request, with advice on the selection, original spare parts and service.

All compressor series of our manufacturers by design: compressors by technology.

Is the MD right for your application?

Tell us the flow rate, the overpressure and the medium – we advise you on the selection, on spare parts and on service.

Send an enquirySpare parts and accessoriesService