Compressors · Dry-running rotary vane compressors · Elmo Rietschle

V-DTR by Elmo Rietschle

The V-DTR by Elmo Rietschle: 2 models – dry-running rotary vane compressors as the manufacturer offers them today. Flow rate 100–130 m³/h at 50 Hz, overpressure up to 1.4 bar, motor power 5.5–7.5 kW.

Go to the modelsSend an enquiry

  • 2models
  • 100–130 m³/hflow rate at 50 Hz
  • 1.4 barmax. overpressure
  • 5.5–7.5 kWmotor power
Dry-running rotary vane compressors

Models

The models of the V-DTR

ModelFlow rate 50 Hz (m³/h)Flow rate 60 Hz (m³/h)Max. overpressure (mbar)Motor 50 Hz (kW)Motor 60 Hz (kW)Weight (kg)Sound pressure level (dB(A))Connection
V-DTR 1001001201,4005.56.516477G 1 1/4 (Druckanschluss)
V-DTR 1401301551,4007.5917477G 1 1/4 (Druckanschluss)

As of October 2026, all values from the documents of Elmo Rietschle. A dash means: not published by the manufacturer. Flow rate and motor power at 50 Hz and 60 Hz respectively, overpressure as the model's maximum.

Also named by Elmo Rietschle, but without published technical data: V-DTR 61, V-DTR 141.

About the series

Dry-running rotary vane compressors by Elmo Rietschle

An eccentrically mounted rotor carries vanes that trap the air in chambers; towards the pressure side the chambers get smaller and compress the air. The vanes run dry, without oil in the compression chamber.

The V-DTR comprises 2 models; the table above gives for each model the data Elmo Rietschle publishes. We do not carry compressors as individual products – the models of this series are available from Ehrler & Beck on request, with advice on the selection, original spare parts and service.

We carry the vacuum pumps of the same family by Elmo Rietschle as products: V series vacuum pumps.

All compressor series of our manufacturers by design: compressors by technology.

Is the V-DTR right for your application?

Tell us the flow rate, the overpressure and the medium – we advise you on the selection, on spare parts and on service.

Send an enquirySpare parts and accessoriesService