Compressors · Dry-running rotary vane compressors · Elmo Rietschle

V-DTN by Elmo Rietschle

The V-DTN by Elmo Rietschle: 3 models – dry-running rotary vane compressors as the manufacturer offers them today. Flow rate 17–43.5 m³/h at 50 Hz, overpressure up to 1 bar, motor power 0.55–1.5 kW.

Go to the modelsSend an enquiry

  • 3models
  • 17–43.5 m³/hflow rate at 50 Hz
  • 1 barmax. overpressure
  • 0.55–1.5 kWmotor power
Dry-running rotary vane compressors

Models

The models of the V-DTN

ModelFlow rate 50 Hz (m³/h)Flow rate 60 Hz (m³/h)Max. overpressure (mbar)Motor 50 Hz (kW)Motor 60 Hz (kW)Weight (kg)Sound pressure level (dB(A))Connection
V-DTN 161720.51,0000.550.632961Rp 1/2 (R1, Druckanschluss)
V-DTN 262631.21,0000.750.93167Rp 1/2 (R1, Druckanschluss)
V-DTN 4143.552.21,0001.51.85367Rp 3/4 (R1, Druckanschluss)

As of October 2026, all values from the documents of Elmo Rietschle. A dash means: not published by the manufacturer. Flow rate and motor power at 50 Hz and 60 Hz respectively, overpressure as the model's maximum.

About the series

Dry-running rotary vane compressors by Elmo Rietschle

An eccentrically mounted rotor carries vanes that trap the air in chambers; towards the pressure side the chambers get smaller and compress the air. The vanes run dry, without oil in the compression chamber.

The V-DTN comprises 3 models; the table above gives for each model the data Elmo Rietschle publishes. We do not carry compressors as individual products – the models of this series are available from Ehrler & Beck on request, with advice on the selection, original spare parts and service.

We carry the vacuum pumps of the same family by Elmo Rietschle as products: V series vacuum pumps.

All compressor series of our manufacturers by design: compressors by technology.

Is the V-DTN right for your application?

Tell us the flow rate, the overpressure and the medium – we advise you on the selection, on spare parts and on service.

Send an enquirySpare parts and accessoriesService