Compressors · Radial compressors · Elektror
S-XP by Elektror
The S-XP by Elektror: 2 models – radial compressors for pressure and suction operation, as the manufacturer offers them today. Flow rate 1,752–2,520 m³/h, pressure difference up to 220 mbar, motor power 11–18.5 kW.
Go to the modelsSend an enquiry
- 2models
- 1,752–2,520 m³/hflow rate
- 220 mbarmax. pressure difference
- 11–18.5 kWmotor power
Models
The models of the S-XP
| Model | Flow rate (m³/h) | Max. pressure difference (mbar) | Motor (kW) | Weight (kg) |
|---|---|---|---|---|
| S-XP 240/40 | 1,752 | 173.3 | 11 | 45 |
| S-XP 245/20 | 2,520 | 220 | 18.5 | 56 |
As of October 2026, all values from the documents of Elektror. A dash means: not published by the manufacturer. Overpressure as the model's maximum.
Side channel and radial blowers state the pressure difference: it applies as overpressure in pressure operation and as vacuum in suction operation.
The blowers of this series run on a frequency converter; flow rate and motor power apply at the manufacturer's rated frequency (80–250 Hz), not at 50 Hz.
About the series
Radial compressors by Elektror
An impeller turning at high speed throws the air outwards into the spiral housing and so builds up pressure – for very large flow rates at small pressure differences.
The S-XP comprises 2 models; the table above gives for each model the data Elektror publishes. We do not carry compressors as individual products – the models of this series are available from Ehrler & Beck on request, with advice on the selection, original spare parts and service.
All compressor series of our manufacturers by design: compressors by technology.
Is the S-XP right for your application?
Tell us the flow rate, the overpressure and the medium – we advise you on the selection, on spare parts and on service.
