Compressors · Claw compressors · DVP
VA by DVP
The VA by DVP: 4 models – claw compressors as the manufacturer offers them today. Flow rate 155–250 m³/h at 50 Hz, overpressure up to 2 bar, motor power 5.5–9.2 kW.
Go to the modelsSend an enquiry
- 4models
- 155–250 m³/hflow rate at 50 Hz
- 2 barmax. overpressure
- 5.5–9.2 kWmotor power
Models
The models of the VA
| Model | Flow rate 50 Hz (m³/h) | Flow rate 60 Hz (m³/h) | Max. overpressure (mbar) | Motor 50 Hz (kW) | Motor 60 Hz (kW) | Weight (kg) | Sound pressure level (dB(A)) | Connection |
|---|---|---|---|---|---|---|---|---|
| VA 155 | 155 | 186 | 1,200 | 5.5 | 6.6 | 143 | 83 | intake 1-1/2"G / outlet 1"G |
| VA 155-1 | 155 | 186 | 2,000 | 7.5 | 9.2 | 147 | 83 | intake 1-1/2"G / outlet 1"G |
| VA 315 | 250 | – | 600 | 7.5 | – | 160 | 83 | intake 2"G / outlet 1-1/4"G |
| VA 315-1 | 250 | – | 1,000 | 9.2 | – | 177 | 83 | intake 2"G / outlet 1-1/4"G |
As of October 2026, all values from the documents of DVP. A dash means: not published by the manufacturer. Flow rate and motor power at 50 Hz and 60 Hz respectively, overpressure as the model's maximum.
About the series
Claw compressors by DVP
Two claw rotors turn in opposite directions without touching each other. They trap the air, compress it inside the housing and push it out to the pressure side. There is no oil in the compression chamber, so the compressed air stays clean.
The VA comprises 4 models; the table above gives for each model the data DVP publishes. We do not carry compressors as individual products – the models of this series are available from Ehrler & Beck on request, with advice on the selection, original spare parts and service.
All compressor series of our manufacturers by design: compressors by technology.
Is the VA right for your application?
Tell us the flow rate, the overpressure and the medium – we advise you on the selection, on spare parts and on service.
