Compressors · Dry-running rotary vane compressors · DVP
CC by DVP
The CC by DVP: 4 models – dry-running rotary vane compressors as the manufacturer offers them today. Flow rate 60–130 m³/h at 50 Hz, overpressure up to 1.3 bar, motor power 2.2–5.5 kW.
Go to the modelsSend an enquiry
- 4models
- 60–130 m³/hflow rate at 50 Hz
- 1.3 barmax. overpressure
- 2.2–5.5 kWmotor power
Models
The models of the CC
| Model | Flow rate 50 Hz (m³/h) | Flow rate 60 Hz (m³/h) | Max. overpressure (mbar) | Motor 50 Hz (kW) | Motor 60 Hz (kW) | Weight (kg) | Sound pressure level (dB(A)) | Connection |
|---|---|---|---|---|---|---|---|---|
| CC 60 | 60 | 70 | 1,000 | 2.2 | 3 | 70 | 70 | 1"G / 1"G |
| CC 80 | 80 | 90 | 1,200 | 3.4 | 4 | 74 | 72 | 1"G / 1"G |
| CC 100 | 100 | 115 | 1,300 | 4 | 4.5 | 93 | 73 | 1-1/2"G / 1-1/2"G |
| CC 140 | 130 | 150 | 1,300 | 5.5 | 6.6 | 97 | 76 | 1-1/2"G / 1-1/2"G |
As of October 2026, all values from the documents of DVP. A dash means: not published by the manufacturer. Flow rate and motor power at 50 Hz and 60 Hz respectively, overpressure as the model's maximum.
About the series
Dry-running rotary vane compressors by DVP
An eccentrically mounted rotor carries vanes that trap the air in chambers; towards the pressure side the chambers get smaller and compress the air. The vanes run dry, without oil in the compression chamber.
The CC comprises 4 models; the table above gives for each model the data DVP publishes. We do not carry compressors as individual products – the models of this series are available from Ehrler & Beck on request, with advice on the selection, original spare parts and service.
All compressor series of our manufacturers by design: compressors by technology.
Is the CC right for your application?
Tell us the flow rate, the overpressure and the medium – we advise you on the selection, on spare parts and on service.
