Compressors · Dry-running rotary vane compressors · DVP
CB by DVP
The CB by DVP: 2 models – dry-running rotary vane compressors as the manufacturer offers them today. Flow rate 10–12 m³/h at 50 Hz, overpressure up to 600 mbar, motor power 0.37–0.45 kW.
Go to the modelsSend an enquiry
- 2models
- 10–12 m³/hflow rate at 50 Hz
- 600 mbarmax. overpressure
- 0.37–0.45 kWmotor power
Models
The models of the CB
| Model | Flow rate 50 Hz (m³/h) | Flow rate 60 Hz (m³/h) | Max. overpressure (mbar) | Motor 50 Hz (kW) | Motor 60 Hz (kW) | Weight (kg) | Sound pressure level (dB(A)) | Connection |
|---|---|---|---|---|---|---|---|---|
| CB 10 | 10 | 12 | 600 | 0.37 | 0.45 | 14 | 64 | 1/2"G / 1/2"G |
| CB 12 | 12 | 14 | 600 | 0.45 | 0.45 | 13.5 | 64 | 1/2"G / 1/2"G |
As of October 2026, all values from the documents of DVP. A dash means: not published by the manufacturer. Flow rate and motor power at 50 Hz and 60 Hz respectively, overpressure as the model's maximum.
About the series
Dry-running rotary vane compressors by DVP
An eccentrically mounted rotor carries vanes that trap the air in chambers; towards the pressure side the chambers get smaller and compress the air. The vanes run dry, without oil in the compression chamber.
The CB comprises 2 models; the table above gives for each model the data DVP publishes. We do not carry compressors as individual products – the models of this series are available from Ehrler & Beck on request, with advice on the selection, original spare parts and service.
All compressor series of our manufacturers by design: compressors by technology.
Is the CB right for your application?
Tell us the flow rate, the overpressure and the medium – we advise you on the selection, on spare parts and on service.








