Compressors · Dry-running rotary vane compressors · Busch

SECO SD by Busch

The SECO SD by Busch: 7 models – dry-running rotary vane compressors as the manufacturer offers them today. Flow rate 9–88 m³/h at 50 Hz, overpressure up to 1.5 bar, motor power 0.37–5.5 kW.

Go to the modelsSend an enquiry

  • 7models
  • 9–88 m³/hflow rate at 50 Hz
  • 1.5 barmax. overpressure
  • 0.37–5.5 kWmotor power
Dry-running rotary vane compressors

Models

The models of the SECO SD

ModelFlow rate 50 Hz (m³/h)Flow rate 60 Hz (m³/h)Max. overpressure (mbar)Motor 50 Hz (kW)Motor 60 Hz (kW)Weight (kg)Sound pressure level (dB(A))Connection
SECO SD 1010 C9126000.370.372156G ½" / G ½" (Gaseintritt / Gasaustritt)
SECO SD 1016 C15186000.550.552557G ½" / G ½" (Gaseintritt / Gasaustritt)
SECO SD 1025 C26336000.90.93364G ¾" / G ¾" (Gaseintritt / Gasaustritt)
SECO SD 1040 D40486001.251.253867G ¾" / G ¾" (Gaseintritt / Gasaustritt)
SECO SD 1063 B55651,0002.238275G 1¼" / G 1¼" (Gaseintritt / Gasaustritt)
SECO SD 1080 B70861,000349476G 1¼" / G 1¼" (Gaseintritt / Gasaustritt)
SECO SD 1100 C881001,5005.57.514077G 1¼" / G 1¼" (Gaseintritt / Gasaustritt)

As of October 2026, all values from the documents of Busch. A dash means: not published by the manufacturer. Flow rate and motor power at 50 Hz and 60 Hz respectively, overpressure as the model's maximum.

About the series

Dry-running rotary vane compressors by Busch

An eccentrically mounted rotor carries vanes that trap the air in chambers; towards the pressure side the chambers get smaller and compress the air. The vanes run dry, without oil in the compression chamber.

The SECO SD comprises 7 models; the table above gives for each model the data Busch publishes. We do not carry compressors as individual products – the models of this series are available from Ehrler & Beck on request, with advice on the selection, original spare parts and service.

We carry the vacuum pumps of the same family by Busch as products: SECO SV vacuum pumps.

All compressor series of our manufacturers by design: compressors by technology.

Is the SECO SD right for your application?

Tell us the flow rate, the overpressure and the medium – we advise you on the selection, on spare parts and on service.

Send an enquirySpare parts and accessoriesService