Edwards HV series
The Edwards HV8000 high vacuum Roots pumps were developed for reliable continuous operation in demanding and aggressive environments.
- 1Model
- 7,200m³/h pumping speed at 50 Hz
- 15kW rated motor power at 50 Hz
Product overview
Products of the Edwards HV series
Each row leads to the model with its technical data and variants.
Edwards HV8000Pumping speed 7,200 m³/h 50 Hz8,640 m³/h 60 HzRated motor power 15 kW 50 Hz18.5 kW 60 HzVariants 6About the series
Features and benefits of the HV series
The series at a glance
With a nominal pumping speed of up to 7,200 m³/h at 50 Hz, they are particularly suitable for large industrial and chemical vacuum applications.
The HV8000 offers stable process performance over a wide pressure range and is designed for continuous operation. A water-cooled mechanical shaft seal, large shaft diameters and robust helical gears ensure high reliability and a long service life.
The pumps can be adapted flexibly to different system concepts and are available with a standard motor or without motor, with horizontal or vertical gas flow and optionally with VFD, inert gas purge, temperature monitoring and water-cooled exhaust aftercooler.
With the HV series, Edwards offers a powerful range of Roots vacuum pumps developed to increase pumping speed and to speed up the evacuation of vacuum systems. The contact-free rotors enable efficient, low-wear gas transport and are particularly suitable for demanding high and medium vacuum applications.
In combination with a suitable backing pump, the HV series can significantly increase the pump performance and evacuation speed of a vacuum system. The proven Roots principle enables reliable transport of the process gas and efficient support of the backing pump.
The robust design and the contact-free rotor technology ensure reliable, durable and low-maintenance operation. The various versions allow flexible adaptation to different vacuum systems and process requirements.
High pumping speed
The Edwards HV series was developed for high pumping capacities and, as a booster, can significantly increase the pumping speed and evacuation speed of a vacuum system.
For high and medium vacuum
In combination with a suitable backing pump, the HV series is suitable for the generation of high and medium vacuum and supports demanding vacuum processes.
Contact-free rotor principle
The two counter-rotating rotors operate without direct contact. This reduces mechanical wear and supports reliable and durable operation.
Operating principle
The Edwards HV series is based on proven Roots vacuum technology and was developed to boost the performance of demanding vacuum systems. Two rotors rotating in opposite directions operate without contact in the pump housing and transport the gas drawn in efficiently from the inlet to the outlet. This allows the HV series to be used as a booster to significantly increase pumping speed and evacuation speed.
In conjunction with a suitable backing pump, the HV series enables efficient generation of high and medium vacuum. The contact-free mode of operation reduces mechanical wear and supports reliable gas transport under demanding operating conditions.
The robust design and the proven Roots principle ensure reliable, durable and low-maintenance operation. Depending on the version, different performance levels are available, so that the pumps can be integrated flexibly into various vacuum systems.
The HV series is suitable for industrial and scientific applications that call for high pumping speed, fast evacuation, reliable continuous operation and powerful vacuum support.
The technology page shows the operating principle with an interactive drawing: Roots vacuum pumps.
Standard operating conditions and performance
- Ambient temperature: 5 to 40 °C, depending on the model and version
- Achievable ultimate vacuum: down to approx. 0.001 mbar (absolute), in combination with a suitable backing pump
- Designed for high and medium vacuum applications
Frequently asked questions
Questions about the Edwards HV series
Which models does the Edwards HV series comprise?
Which pumping speeds does the series cover?
How does the technology of the series work?
Does Ehrler & Beck supply spare parts and service for the Edwards HV series?
Which model fits your process?
Tell us the gas to be conveyed, the working pressure and the flow rate you need – we will advise you on selection, spare parts and service.
