RUVAC WA 251 3Ph 200-240/380-460 V 50/60 Hz, IE3 motor

Leybold RUVAC WA 251 – Roots pump with 253 m³/h nominal pumping speed

The RUVAC WA 251 is the smallest Roots pump in the air-cooled WA series. It has no pressure equalisation line and is therefore only switched on once the backing pump has reached the cut-in pressure of around 90 mbar. With a two-stage TRIVAC D 65 B as the backing pump, Leybold specifies an ultimate total pressure of < 8 × 10⁻⁴ mbar. The nominal pumping speed is 253 m³/h at 50 Hz and 304 m³/h at 60 Hz, the maximum effective pumping speed 210 and 251 m³/h respectively. The pump measures 735 × 250 × 300 mm, weighs 90 kg and is connected via DN 63 ISO-K; the noise level is below 64 dB(A).

Typical applications

Roots pumps of the RUVAC series work as boosters in front of an oil-sealed or dry backing pump. Leybold lists heat treatment and furnace construction, metallurgy, large-area coating including architectural glass, load-lock chambers, high-speed food packaging, the evacuation of lamps, and crystal pulling systems for the semiconductor and solar industries as typical applications.

Variants of the RUVAC WA 251

The RUVAC WA 251 is available from Ehrler & Beck in three variants (part numbers 11720, 11720TE, 11724). The motor power of all versions with motor is 1.1 kW at 50 and 60 Hz; the mains voltage ranges from 200–240 V to 380–460 V. The pump is also available without a motor for customer IEC motors.

Features of the RUVAC WA/WAU

• Air-cooled, flange-mounted three-phase standard motor of efficiency class IE3, easily exchangeable for customer motors
• Shaft seals and elastomer seals made of FPM (FKM); seals and their housing easy to replace
• WAU: integrated pressure equalisation line as overload protection at high pressures
• Supplied for vertical pumping direction; conversion to horizontal pumping direction possible by the customer
• LEYBONOL LVO 130 lubricant, filling supplied separately; inlet flange with seal and dirt trap
• ATEX category 3i (inside) as standard, valid only for 50 Hz operation

Pumping speed 50Hz	210
Pumping speed 60Hz	251
Ultimate pressure	8 × 10-4
Rated motor power 50Hz	1.1
Rated motor power 60Hz	1.1
Motor efficiency class	IE3
Weight	90
Length	73.5
Width	25
Height	30
Inlet connection flange	DN 63 ISO-K
Outlet connection flange	DN 63 ISO-K
Noise level	64 dB(A)
Cooling method	Air cooling
Oil type	LEYBONOL LVO 130

Additional technical data