Roto Xtend Duty Fluid 20l

Increase the performance and service life of your compressors with the high-quality Roto-Xtend Duty Fluid 20l (2901 1701 00) from Atlas Copco, which you can obtain from Ehrler and Beck. Specially developed for use in Atlas Copco oil-injected rotary screw compressors, this long-lasting PAO oil based on synthetic hydrocarbons and special additives meets all lubrication needs under a wide range of conditions.

Manufacturer: Atlas Copco

Order number: 2901 1701 00

Atlas Copco Roto-Xtend Duty Fluid 20l

The Roto-Xtend Duty Fluid, available from Ehrler and Beck, offers excellent protection for your compressor and contributes to a longer service life and lower operating costs. It is characterized by its excellent resistance to oxidation, which slows down the formation of acids in the lubricant and thus extends the oil life and the preservation of its properties within the service intervals.

With an extended drain interval of up to 8,000 hours or 2 years, even in demanding conditions, the Roto-Xtend Duty Fluid offers exceptional protection against deposits and sludge. This keeps the system clean and minimizes contamination from the oil separator. The lower pressure drop through the oil separator results in reduced energy consumption.

The Roto-Xtend Duty Fluid, which you can buy from Ehrler and Beck, protects screws and bearings from wear, extends the life of moving parts and ensures efficient lubrication under various operating conditions. The high viscosity stability of the lubricant prevents rust formation, even in the case of water contamination, and protects your investment even in humid environments or during standstill phases during transport or storage.

Thanks to its excellent segregation properties and rapid air release, the Roto-Xtend Duty Fluid efficiently separates air from lubricants without foaming. This protects against corrosion and maintains the lubricating properties for a longer service life. It is also compatible with Atlas Copco OSC & OSD condensate treatment units, which ensure high purity separation.

Roto-Xtend Duty Fluid offers excellent seal compatibility, reducing the risk of leaks and the need for periodic sealing of equipment. The longer maintenance intervals also save you costs for the disposal of lubricants and make a contribution to environmental protection.

TECHNICAL INFORMATION

Performance method Unit Value
Density at 15°C ISO 3675 kg/dm³ 0,84
Viscosity at 40°C ASTM D 445 mm²/s 46
viscosity index ASTM D 2270 133
Water separability at 54°C ASTM D 1401 ml oil/water/emulsion
40/40/0 (15 minutes)
foam stability ASTM D892 ml 0/0/0
total acid number ASTM D 974 mg KOH/g 0,14
FZG error stage ISO14635-2 12
rust test ASTM-D 665B happen
pour point ASTM D97 °C -57
oil type
Synthetic-based technical lubricant
maintenance intervals
8 000 h or 2 years
Surroundings
Ambient temperature range 0°C to 46°C
Compatible with high humidity operation
Compatible with high pressure equipment
equipment
Atlas Copco oil injected screws
compatibility
Compressors GA – GX – GN – GR

QUOTE REQUEST

    *Required fields