Roto-Xtend Duty Fluid 1000l
Increase the performance and service life of your compressors with the high-quality Roto-Xtend Duty Fluid 1000l (2901 1703 00) from Atlas Copco, which you can obtain from Ehrler and Beck. Specially developed for use in Atlas Copco oil-injected rotary screw compressors, this long-lasting PAO oil based on synthetic hydrocarbons and special additives meets all lubrication needs under a wide range of conditions.
Manufacturer: Atlas Copco
Series: Roto-Xtend Duty Fluid
Technology: Oils and fats,Synthetic lubricant
Order number: 2901 1703 00
Roto-Xtend Duty Fluid 1000l von Atlas Copco
The Roto-Xtend Duty Fluid, available from Ehrler and Beck, offers excellent protection for your compressor and contributes to a longer service life and lower operating costs. It is characterized by its excellent resistance to oxidation, which slows down the formation of acids in the lubricant and thus extends the oil life and the preservation of its properties within the service intervals.
With an extended drain interval of up to 8,000 hours or 2 years, even in demanding conditions, the Roto-Xtend Duty Fluid offers exceptional protection against deposits and sludge. This keeps the system clean and minimizes contamination from the oil separator. The lower pressure drop through the oil separator results in reduced energy consumption.
The Roto-Xtend Duty Fluid, which you can buy from Ehrler and Beck, protects screws and bearings from wear, extends the life of moving parts and ensures efficient lubrication under various operating conditions. The high viscosity stability of the lubricant prevents rust formation, even in the case of water contamination, and protects your investment even in humid environments or during standstill phases during transport or storage.
Thanks to its excellent segregation properties and rapid air release, the Roto-Xtend Duty Fluid efficiently separates air from lubricants without foaming. This protects against corrosion and maintains the lubricating properties for a longer service life. It is also compatible with Atlas Copco OSC & OSD condensate treatment units, which ensure high purity separation.
Roto-Xtend Duty Fluid offers excellent seal compatibility, reducing the risk of leaks and the need for periodic sealing of equipment. The longer maintenance intervals also save you costs for the disposal of lubricants and make a contribution to environmental protection.
TECHNICAL INFORMATION
| Performance | method | Unit | Value |
| Density at 15°C | ISO 3675 | kg/dm³ | 0,84 |
| Viscosity at 40°C | ASTM D 445 | mm²/s | 46 |
| viscosity index | ASTM D 2270 | 133 | |
| Water separability at 54°C | ASTM D 1401 | ml oil/water/emulsion |
40/40/0 (15 minutes)
|
| foam stability | ASTM D892 | ml | 0/0/0 |
| total acid number | ASTM D 974 | mg KOH/g | 0,14 |
| FZG error stage | ISO14635-2 | 12 | |
| rust test | ASTM-D 665B | happen | |
| pour point | ASTM D97 | °C | -57 |
| oil type |
Synthetic-based technical lubricant
|
| maintenance intervals |
8 000 h or 2 years
|
| Surroundings |
Ambient temperature range 0°C to 46°C
|
|
Compatible with high humidity operation
|
|
|
Compatible with high pressure equipment
|
|
| equipment |
Atlas Copco oil injected screws
|
| compatibility |
Compressors GA – GX – GN – GR
|
QUOTE REQUEST
