Roto Synthetic Fluid ULTRA 209l
Rely on Atlas Copco's Roto Synthetic Fluid ULTRA 209l (1630 2041 29), available from Ehrler and Beck, for demanding applications and the best performance from your compressors. This high-quality synthetic oil offers extended service intervals of up to 4,000 hours, even under difficult conditions, and ensures efficient operation of your compressors in dusty and humid environments.
Manufacturer: Atlas Copco
Series: Roto Synthetic Fluid ULTRA
Technology: Oils and fats,Synthetic lubricant
Order number: 1630 2041 29
Roto Synthetic Fluid ULTRA 209l von Atlas Copco
The Roto Synthetic Fluid ULTRA, which you can purchase from Ehrler and Beck, is a combination of a premium synthetic base oil and an improved additive package that is specifically tailored to the needs of Atlas Copco compressors. It protects your compressor from deposits and provides improved energy efficiency compared to traditional mineral oils.
Thanks to its excellent resistance to oxidation, Roto Synthetic Fluid ULTRA slows down the formation of acids in the lubricant, extends the service life of the oil and preserves its properties within the maintenance intervals. It offers exceptional protection against deposits and sludge, keeping the system clean and limiting contamination from the oil separator. This results in a lower pressure drop through the oil separator, which reduces energy consumption.
With a high viscosity index, the oil viscosity remains stable even at high temperatures. This ensures efficient lubrication and protection of screws and bearings under various operating conditions. The Roto Synthetic Fluid ULTRA also offers good corrosion protection, even in the case of water contamination, and protects your investment even in very humid conditions or during downtimes during transport or storage.
The excellent segregation properties of the Roto Synthetic Fluid ULTRA enable a high water separation capability during the lubricant cooling phase and the condensate treatment process. It is compatible with Atlas Copco OSC & OSD condensate treatment units with high purity separation.
Thanks to the combination of a tailor-made additive package and base oil, the Roto Synthetic Fluid ULTRA is less volatile, which leads to reduced oil consumption. This saves costs and protects the environment. The longer service intervals reduce the number of oil changes and reduce labor, lubricant disposal and purchasing frequency costs.
Rely on Atlas Copco's environmentally friendly Roto Synthetic Fluid ULTRA, available from Ehrler and Beck, to protect your compressors and boost their performance.
TECHNICAL INFORMATION
| Performance | method | Unit | Value |
| Density at 15°C | ISO 3675 | kg/dm3 | 0,83 |
| Viscosity at 40°C | ASTM D445 | mm2/s | 5,25 |
| viscosity index | ASTM D 2270 | 144 | |
| Water separability at 54°C | ASTM D1401 | ml of oil/water/emulsion |
40/40/0 (5 mins)
|
| foam stability | ASTM D892 | ml | 0/0/0 |
| total acid number | ASTM D 974 | mg KOH/g | 0,09 |
| NOACK evaporation | ASTM D5800 | % | 2,0 |
| rust test | ASTM D 665B | passport | |
| pour point | ASTM D97 | °C | -45 |
| oil type |
Synthetic-based technical lubricant
|
| maintenance intervals |
Up to 4,000 h or 2 years in severe environmental conditions (compressors) and 2,000 h or 2 years (compressors with energy recovery systems)
|
| Surroundings |
Ambient temperature range from 0°C to +40°C & dusty environment or Ambient temperature range from 0°C to +40°C & humid environment
|
|
Compatible with operation in high humidity conditions
|
|
|
Compatible with high pressure equipment
|
|
| equipment |
Atlas Copco oil injected screws
|
| compatibility |
Compressors GA – GX – GN – GR
|
QUOTE REQUEST
